Re: [PATCH v2 2/4] drm/verisilicon: nuke planes' atomic_enable hooks

From: Icenowy Zheng

Date: Tue Nov 17 2026 - 02:34:20 EST


在 2026-11-17二的 08:25 +0100,Thomas Zimmermann写道:
> Hi
>
> Am 17.11.26 um 06:19 schrieb Icenowy Zheng:
> [...]
> > > > Sure, but is that a problem for this hardware?
> > > For the cursor plane, the unchecked coordinate might be improper
> > > for
> > > the registers.
> > >
> > > For the primary plane, if the plane is found to be totally off by
> > > drm_atomic_helper_check_plane_state(), the check for
> > > can_position,
> > > which is below the code snippet I referenced, would be bypassed,
> > > and
> > > such plane would be programmed to be visible by the atomic_update
> > > hook
> > > even if it shouldn't be visible.
> > Well I am now thinking that bound-but-invisible situation is
> > commonly
> > ignored by drivers.
> >
> > For drm/verisilicon, maybe I'd remove both atomic_disable and
> > atomic_enable; however I think the atomic helpers may need some
> > flag to
> > consider bound-but-invisible planes when calling
> > atomic_{dis,en}able.
>
> I don't think I really understand what you're up to, but it seems
> you're
> overthinking the whole thing. Other drivers only care about plane
> on/off

Well I don't know whether I am overthinking...

Enabled but invisible planes are explicitly allowed in
drm_atomic_helper_check_plane_state(), and even the can_position check
is bypassed in such case (so such a configuration can even appear on
primary planes). In addition, in most implementations for atomic_check,
the invisible situations have the validity check explicitly skipped, so
just disallow enabled-but-invisible planes in atomic_check would make
the behavior quite different with most drivers.

Maybe I should craft some "evil" programs to check for this situation.

Thanks,
Icenowy

> and the contained image. That's also what the 3 callbacks are for. It
> usually works nicely. Hence me asking. But maybe verisilicon is
> different, IDK.
>
> My suggestion is therefore to remove _enable and _disable and keep
> all
> logic in _update.
>
> atomic_update()
> {
>      if (plane_state->visible) {
>          // do update
>          // enable hw plane
>      } else {
>          // disable hw plane
>      }
> }
>
> If you have any special cases where you want visible to be false (or
> true), detect them in atomic_check and set the flags accordingly.
>
> atomic_check()
> {
> drm_atomic_helper_check_plane_state()     if (awkward coords)
>           plane_state->visible = false;
> }
>
> Best regards
> Thomas
>
> >
> > Thanks,
> > Icenowy
> >
> > > Thanks,
> > > Icenowy
> > >
> > > > Best regards
> > > > Thomas
> > > >
> > > > > The end of drm_atomic_helper_check_plane_state() says:
> > > > >
> > > > > ```
> > > > > if (!plane_state->visible)
> > > > > /*
> > > > > * Plane isn't visible; some drivers can
> > > > > handle
> > > > > this
> > > > > * so we just return success here.  Drivers
> > > > > that
> > > > > can't
> > > > > * (including those that use the primary
> > > > > plane
> > > > > helper's
> > > > > * update function) will return an error
> > > > > from
> > > > > their
> > > > > * update_plane handler.
> > > > > */
> > > > > return 0;
> > > > > ```
> > > > >
> > > > > Thanks,
> > > > > Icenowy
> > > > >
> > > > > > [1]
> > > > > > https://elixir.bootlin.com/linux/v7.3.1/source/drivers/gpu/drm/drm_atomic_helper.c#L3030
> > > > > >
> > > > > > Best regards
> > > > > > Thomas
> > > > > >
> > > > > > >     };
> > > > > > >    
> > > > > > > diff --git
> > > > > > > a/drivers/gpu/drm/verisilicon/vs_primary_plane.c
> > > > > > > b/drivers/gpu/drm/verisilicon/vs_primary_plane.c
> > > > > > > index 8e94491693019..fca692f4f7d5c 100644
> > > > > > > --- a/drivers/gpu/drm/verisilicon/vs_primary_plane.c
> > > > > > > +++ b/drivers/gpu/drm/verisilicon/vs_primary_plane.c
> > > > > > > @@ -59,25 +59,6 @@ static void
> > > > > > > vs_primary_plane_commit(struct
> > > > > > > vs_dc
> > > > > > > *dc, unsigned int output)
> > > > > > >      VSDC_FB_CONFIG_EX_COMMIT);
> > > > > > >     }
> > > > > > >    
> > > > > > > -static void vs_primary_plane_atomic_enable(struct
> > > > > > > drm_plane
> > > > > > > *plane,
> > > > > > > -    struct
> > > > > > > drm_atomic_commit *atomic_state)
> > > > > > > -{
> > > > > > > - struct drm_plane_state *state =
> > > > > > > drm_atomic_get_new_plane_state(atomic_state,
> > > > > > > -
> > > > > > >
> > > > > > >        plane);
> > > > > > > - struct drm_crtc *crtc = state->crtc;
> > > > > > > - struct vs_crtc *vcrtc =
> > > > > > > drm_crtc_to_vs_crtc(crtc);
> > > > > > > - unsigned int output = vcrtc->id;
> > > > > > > - struct vs_dc *dc = vcrtc->dc;
> > > > > > > -
> > > > > > > - regmap_set_bits(dc->regs,
> > > > > > > VSDC_FB_CONFIG_EX(output),
> > > > > > > - VSDC_FB_CONFIG_EX_FB_EN);
> > > > > > > - regmap_update_bits(dc->regs,
> > > > > > > VSDC_FB_CONFIG_EX(output),
> > > > > > > -
> > > > > > > VSDC_FB_CONFIG_EX_DISPLAY_ID_MASK,
> > > > > > > -
> > > > > > > VSDC_FB_CONFIG_EX_DISPLAY_ID(output));
> > > > > > > -
> > > > > > > - vs_primary_plane_commit(dc, output);
> > > > > > > -}
> > > > > > > -
> > > > > > >     static void vs_primary_plane_atomic_disable(struct
> > > > > > > drm_plane
> > > > > > > *plane,
> > > > > > >          struct
> > > > > > > drm_atomic_commit *atomic_state)
> > > > > > >     {
> > > > > > > @@ -144,13 +125,18 @@ static void
> > > > > > > vs_primary_plane_atomic_update(struct drm_plane *plane,
> > > > > > >      regmap_write(dc->regs,
> > > > > > > VSDC_FB_BLEND_CONFIG(output),
> > > > > > >          
> > > > > > > VSDC_FB_BLEND_CONFIG_BLEND_DISABLE);
> > > > > > >    
> > > > > > > + regmap_set_bits(dc->regs,
> > > > > > > VSDC_FB_CONFIG_EX(output),
> > > > > > > + VSDC_FB_CONFIG_EX_FB_EN);
> > > > > > > + regmap_update_bits(dc->regs,
> > > > > > > VSDC_FB_CONFIG_EX(output),
> > > > > > > +
> > > > > > > VSDC_FB_CONFIG_EX_DISPLAY_ID_MASK,
> > > > > > > +
> > > > > > > VSDC_FB_CONFIG_EX_DISPLAY_ID(output));
> > > > > > > +
> > > > > > >      vs_primary_plane_commit(dc, output);
> > > > > > >     }
> > > > > > >    
> > > > > > >     static const struct drm_plane_helper_funcs
> > > > > > > vs_primary_plane_helper_funcs = {
> > > > > > >      .atomic_check = vs_primary_plane_atomic_check,
> > > > > > >      .atomic_update =
> > > > > > > vs_primary_plane_atomic_update,
> > > > > > > - .atomic_enable =
> > > > > > > vs_primary_plane_atomic_enable,
> > > > > > >      .atomic_disable =
> > > > > > > vs_primary_plane_atomic_disable,
> > > > > > >     };
> > > > > > >