Re: [PATCH v5 07/12] arm64: dts: qcom: sm6350-lena: Enable PM7250B
From: Luca Weiss
Date: Tue Nov 17 2026 - 07:05:13 EST
On Mon Nov 16, 2026 at 11:50 PM CET, erebion wrote:
> Enable PM7250B and some components on it for the Xperia 10 III.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Reviewed-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> Signed-off-by: erebion <erebion@xxxxxxxxxx>
> ---
> .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 48 ++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> index 9d880f6baa531..697e1cfae72e0 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> @@ -4,6 +4,10 @@
> */
> /dts-v1/;
>
> +/* PM7250B is configured to use SID2/3 */
> +#define PM7250B_SID 2
> +#define PM7250B_SID1 3
> +
> #include <dt-bindings/firmware/qcom,scm.h>
> #include <dt-bindings/leds/common.h>
> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> @@ -11,6 +15,7 @@
> #include "sm6350.dtsi"
> #include "pm6150l.dtsi"
> #include "pm6350.dtsi"
> +#include "pm7250b.dtsi"
>
> / {
> model = "Sony Xperia 10 III";
> @@ -372,6 +377,49 @@ &pm6350_resin {
> status = "okay";
> };
>
> +&pm7250b_adc {
> + channel@4d {
> + reg = <ADC5_AMUX_THM1_100K_PU>;
> + label = "charger_skin_therm";
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + qcom,ratiometric;
> + };
> +
> + channel@4f {
> + reg = <ADC5_AMUX_THM3_100K_PU>;
> + label = "conn_therm";
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + qcom,ratiometric;
> + };
> +};
> +
> +&pm7250b_adc_tm {
> + status = "okay";
> +
> + charger-skin-therm@0 {
> + reg = <0>;
> + io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +
> + conn-therm@1 {
> + reg = <1>;
> + io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +};
> +
> +&pm7250b_vbus {
> + regulator-min-microamp = <500000>;
> + regulator-max-microamp = <1000000>;
> +
> + status = "okay";
> +};
> +
> &qupv3_id_0 {
> status = "okay";
> };