Re: [PATCH v5 11/12] arm64: dts: qcom: sm6350-lena: Add PM6150L thermals

From: Luca Weiss

Date: Tue Nov 17 2026 - 07:10:24 EST


On Mon Nov 16, 2026 at 11:50 PM CET, erebion wrote:
> Configure the thermals for the PA_THERM1, MSM_THERM, PA_THERM0,
> CAM_FLASH_THERM and QUIET_THERM thermistors connected to
> PM6150L.
>
> Due to hardware constraints we can only register 4 zones with
> pm6150l_adc_tm, the other 2 we can register via generic-adc-thermal.
>
> RFC_CAM_THERM is intentionally omitted for now and will have to be
> added once it is clear how it should be added.
>
> The trip points can really only be considered as placeholders, more
> configuration with cooling etc. can be added later.

Reviewed-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>

> Signed-off-by: erebion <erebion@xxxxxxxxxx>
> ---
> .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 160 +++++++++++++++++++++
> 1 file changed, 160 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> index b86fe11fd5296..b19e76b3c1a75 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> @@ -81,6 +81,13 @@ memory@fe901000 {
> };
> };
>
> + msm_therm_sensor: thermal-sensor-msm {
> + compatible = "generic-adc-thermal";
> + #thermal-sensor-cells = <0>;
> + io-channels = <&pm6150l_adc ADC5_AMUX_THM2_100K_PU>;
> + io-channel-names = "sensor-channel";
> + };
> +
> thermal-zones {
> chg-skin-thermal {
> thermal-sensors = <&pm7250b_adc_tm 0>;
> @@ -106,6 +113,74 @@ active-config0 {
> };
> };
>
> + pa0-thermal {
> + thermal-sensors = <&pm6150l_adc_tm 1>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + pa1-thermal {
> + thermal-sensors = <&pm6150l_adc_tm 0>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + quiet-thermal {
> + thermal-sensors = <&pm6150l_adc_tm 3>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + rfc-flash-thermal {
> + thermal-sensors = <&pm6150l_adc_tm 2>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + sdm-skin-thermal {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> + thermal-sensors = <&msm_therm_sensor>;
> +
> + trips {
> + trip0 {
> + temperature = <45000>;
> + hysteresis = <0>;
> + type = "passive";
> + };
> +
> + trip1 {
> + temperature = <55000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> + };
> +
> xo-thermal {
> thermal-sensors = <&pmk8350_adc_tm 0>;
>
> @@ -392,6 +467,83 @@ &mpss {
> status = "okay";
> };
>
> +&pm6150l_adc {
> + pinctrl-0 = <&pm6150l_adc_default>;
> + pinctrl-names = "default";
> +
> + channel@4d {
> + reg = <ADC5_AMUX_THM1_100K_PU>;
> + label = "pa_therm1";
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + qcom,ratiometric;
> + };
> +
> + channel@4e {
> + reg = <ADC5_AMUX_THM2_100K_PU>;
> + label = "msm_therm";
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + qcom,ratiometric;
> + };
> +
> + channel@4f {
> + reg = <ADC5_AMUX_THM3_100K_PU>;
> + label = "pa_therm0";
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + qcom,ratiometric;
> + };
> +
> + channel@54 {
> + reg = <ADC5_GPIO3_100K_PU>;
> + label = "rear_cam_flash_therm";
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + qcom,ratiometric;
> + };
> +
> + channel@55 {
> + reg = <ADC5_GPIO4_100K_PU>;
> + label = "quiet_therm";
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + qcom,ratiometric;
> + };
> +};
> +
> +&pm6150l_adc_tm {
> + status = "okay";
> +
> + pa-therm1@0 {
> + reg = <0>;
> + io-channels = <&pm6150l_adc ADC5_AMUX_THM1_100K_PU>;
> + qcom,hw-settle-time-us = <200>;
> + qcom,ratiometric;
> + };
> +
> + pa-therm0@1 {
> + reg = <1>;
> + io-channels = <&pm6150l_adc ADC5_AMUX_THM3_100K_PU>;
> + qcom,hw-settle-time-us = <200>;
> + qcom,ratiometric;
> + };
> +
> + rear-cam-flash-therm@2 {
> + reg = <2>;
> + io-channels = <&pm6150l_adc ADC5_GPIO3_100K_PU>;
> + qcom,hw-settle-time-us = <200>;
> + qcom,ratiometric;
> + };
> +
> + quiet-therm@3 {
> + reg = <3>;
> + io-channels = <&pm6150l_adc ADC5_GPIO4_100K_PU>;
> + qcom,hw-settle-time-us = <200>;
> + qcom,ratiometric;
> + };
> +};
> +
> &pm6150l_flash {
> status = "okay";
>
> @@ -405,6 +557,14 @@ led-0 {
> };
> };
>
> +&pm6150l_gpios {
> + pm6150l_adc_default: adc-default-state {
> + pins = "gpio7", "gpio10";
> + function = PMIC_GPIO_FUNC_NORMAL;
> + bias-high-impedance;
> + };
> +};
> +
> &pm6350_gpios {
> vol_down_n: vol-down-n-state {
> pins = "gpio2";