[PATCH v5 0/9] Add SpacemiT K1 USB2.0 controllers support
From: Junzhong Pan
Date: Tue Nov 17 2026 - 07:40:13 EST
The SpacemiT K1 SoC has two USB2.0 controllers, one has Dual-Role
support, but the hardware has no internal OTG registers, the other is
Host only. These controllers are compatible with Chipidea USB2 driver
with some flags set and reset control support.
This series is based on 7.4-rc1 and has been tested on Banana Pi F3
development board.
A self-powered USB device/hub is needed to test the host function of the
dual-role controller on Banana Pi F3, a MINI-PCIe USB2.0 module (a
cellular module e.g.) is needed to test the host only controller.
---
Changes in v5:
- rebase on 7.4-rc1
- drop the ci_hdrc_usb2_priv struct as sashiko suggested
- Link to v4: https://lore.kernel.org/r/20261009-b4-spacemit-k1-usb2-v4-0-2d98e5324d9a@xxxxxxxxxxxxxxxxxx
Changes in v4:
- drop irrelevant Tested-by tags collected by b4
- collect Reviewd-by from Yixun
- Link to v3: https://lore.kernel.org/r/20260927-b4-spacemit-k1-usb2-v3-0-ce7095896039@xxxxxxxxxxxxxxxxxx
Changes in v3:
- collect tags
- merge the two dt-binding commits
- use local variables when acquiring devm managed clock/reset
- drop manual clk_disable_unprepare() from the remove path
- enable related drivers as modules in defconfig
- Link to v2: https://lore.kernel.org/r/20260908-b4-spacemit-k1-usb2-v2-0-f07342ffa051@xxxxxxxxxxxxxxxxxx
Changes in v2:
- rebase on 7.3-rc1 and collect tags
- reorder the usbphy and usb nodes in k1-bananapi-f3
- add constraint for spacemit,k1-usb2 in dt-binding
- add OrangePi RV2 device-tree change
- use devm_clk_get_optional_enabled() for driver according to sashiko's advice
- Link to v1: https://lore.kernel.org/r/20260812-b4-spacemit-k1-usb2-v1-0-f28cf29e522b@xxxxxxxxxxxxxxxxxx
Signed-off-by: Junzhong Pan <panjunzhong@xxxxxxxxxxxxxxxxxx>
---
Junzhong Pan (9):
dt-bindings: usb: ci-hdrc-usb2: add spacemit,k1-usb2 compatible
usb: chipidea: usb2: use devm_clk_get_optional_enabled()
usb: chipidea: usb2: drop the ci_hdrc_usb2_priv wrapper struct
usb: chipidea: usb2: add optional reset support
usb: chipidea: usb2: add SpacemiT K1 support
riscv: dts: spacemit: add USB2.0 controller nodes for K1
riscv: dts: spacemit: enable USB2.0 controllers on BananaPi F3
riscv: dts: spacemit: enable USB2.0 controllers on OrangePi RV2
riscv: defconfig: enable ChipIdea USB controller support
.../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 15 ++++++
arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 16 ++++++
arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts | 28 ++++++++++
arch/riscv/boot/dts/spacemit/k1.dtsi | 40 +++++++++++++++
arch/riscv/configs/defconfig | 4 ++
drivers/usb/chipidea/ci_hdrc_usb2.c | 59 ++++++++++------------
6 files changed, 131 insertions(+), 31 deletions(-)
---
base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
change-id: 20260812-b4-spacemit-k1-usb2-97adfc283d58
Best regards,
--
Junzhong Pan <panjunzhong@xxxxxxxxxxxxxxxxxx>