Re: [PATCH 1/8] dt-bindings: net: Add MDIO demultiplexer

From: Andrew Lunn

Date: Tue Nov 17 2026 - 08:24:39 EST


On Tue, Nov 17, 2026 at 01:06:19PM +0800, Jisheng Zhang wrote:
> On Mon, Nov 16, 2026 at 04:06:25PM +0100, Andrew Lunn wrote:
> > On Mon, Nov 16, 2026 at 09:54:35PM +0800, Jisheng Zhang wrote:
> > > Assume we have the following implementation:
> > > ----------
> > > |mmio reg|
> > > ----------
> > > |
> > > -------- | -------
> > > | MAC0 |--MDIO-----| PHY |
> > > -------- | | -------
> > > | |
> > > -------- | | -------
> > > | MAC1 |-- ----| PHY |
> > > -------- -------
> > >
> > > Both MAC0 and MAC1 have MDIO bus masters, and tie together to
> > > a single set of clock and data lines, which go to some PHYs. While
> > > there's a mmio reg to control which MAC mdio master can operate
> > > the single mdio clock and data lines, so only one MAC can operate
> > > the mdio clock and data lines.
> >
> > How does this differ from pinmux?
> >
>
> in my case, the two MAC MDIO bus masters share the same MDC and MDIO
> pins.

That does not answer my question. How is this different to pinmux?

Andrew

---
pw-bot: cr