Re: [PATCH 0/5] mtd: maps: lantiq-flash: support boot loaders using the EBU endianness swap

From: Miquel Raynal

Date: Tue Nov 17 2026 - 08:37:58 EST


On Sat, 14 Nov 2026 11:06:02 +0100, Simon Wunderlich wrote:
> Some Lantiq boards, like the bintec elmeg RS123 and RS353, have a boot
> loader that enables the EBU's own endianness swapping for the NOR flash
> chip select. lantiq-flash then fails to probe the flash. Patch 4 lets
> such boards opt in to honouring that bit with a new
> "lantiq,ebu-swap-check" property. The bit only works on VR9 from
> revision 1.2 and on AR10, so the driver cannot rely on it on every SoC.
> The property follows Hauke's review of an earlier attempt at this fix
> in 2017 [1].
>
> [...]

Applied to mtd/next, thanks!

[1/5] mtd: maps: lantiq-flash: fix NULL pointer dereference on probe
commit: fd1cc5b1dc4f2f99917bc5c016a2593a951c2670
[2/5] dt-bindings: mtd: Add lantiq,nor
(no commit info)
[3/5] mips: lantiq: xway: sysctrl: export ltq_ebu_membase
(no commit info)
[4/5] mtd: maps: lantiq-flash: honour the EBU's own endianness swap
(no commit info)
[5/5] mips: lantiq: danube: rename NOR node on EASY50712 reference board
(no commit info)

Patche(s) should be available on mtd/linux.git and will be
part of the next PR (provided that no robot complains by then).

Kind regards,
Miquèl