Re: [Linux-stm32] [PATCH 1/2] arm64: dts: st: enable eMMC on stm32mp257f-ev1

From: Dario Binacchi

Date: Tue Nov 17 2026 - 12:21:47 EST


Hello Christophe,

On Tue, Nov 17, 2026 at 5:58 PM Christophe KERELLO
<christophe.kerello@xxxxxxxxxxx> wrote:
>
> Hello Dario,
>
> On 11/15/26 17:34, Dario Binacchi wrote:
> > Enable the eMMC connected to SDMMC2 with an 8-bit bus on the
> > STM32MP257F-EV1. VDDIO2 is tied to the 1.8 V rail on this board, so
> > the DDR52 and HS200 modes are enabled. Tested in HS200 mode at 100 MHz.
> >
> > Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
> > ---
> >
> > arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 17 +++++++++++++++++
> > 1 file changed, 17 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
> > index 782b4bb843ee..9c38c4fe0c1f 100644
> > --- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
> > +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
> > @@ -431,6 +431,23 @@ &sdmmc1 {
> > status = "okay";
> > };
> >
> > +&sdmmc2 {
> > + pinctrl-names = "default", "opendrain", "sleep";
> > + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
> > + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
> > + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
> > + non-removable;
> > + no-sd;
> > + no-sdio;
> > + st,neg-edge;
> > + bus-width = <8>;
> > + mmc-ddr-1_8v;
> > + mmc-hs200-1_8v;
> > + vmmc-supply = <&scmi_vdd_emmc>;
> > + vqmmc-supply = <&scmi_vddio2>;
> > + status = "okay";
> > +};
>
> This source code appears to come from ST's downstream Linux tree. When
> upstreaming from that tree,
> please preserve ST author and Signed-off-by tags.

I started from nodes already in mainline:

c5ce8d7bcc78 ("arm64: dts: st: support Engicam MicroGEA-STM32MP257 SoM")
94911ce62b45 ("arm64: dts: st: enable eMMC on stm32mp257f-dk")

and only adapted the pin groups and supplies to the EV1. The first
one is mine, as are the SDMMC2 controller node and the pin groups
this patch relies on:

513410ae43bc ("arm64: dts: st: add SDMMC2 support on stm32mp25")
17d813da1689 ("arm64: dts: st: add sdmmc2 pins for stm32mp25")

Given the hardware, I don't think there is much room for it to look different.

Thanks and regards,
Dario

> https://github.com/STMicroelectronics/linux/commit/d00ddc95c630ebf948ebe9c22fcbca145d771afc
>
> Regards,
> Christophe Kerello.
>
> > +
> > &spi3 {
> > pinctrl-names = "default", "sleep";
> > pinctrl-0 = <&spi3_pins_a>;
> > ---
> > base-commit: 23c62304dde29abe92013d85910d03a77dada35d
> > branch: stm32mp257f-ev1-emmc-aliases
> >
>


--
Dario Binacchi
Senior Embedded Software Engineer
M. +39 328 0625246
dario.binacchi@xxxxxxxxxxxxxxxxxxxx
―――――――――――――――
Amarula Solutions SRL
Via Felice Cavallotti 25D, 41012 Carpi, MO, IT
info@xxxxxxxxxxxxxxxxxxxx
www.amarulasolutions.com