[PATCH 00/10] phy/drm: amlogic: Extract Meson HDMI TX PHY into a dedicated driver
From: Ronald Claveau via B4 Relay
Date: Tue Nov 17 2026 - 14:36:30 EST
This series moves the Amlogic Meson HDMI TX PHY handling (covering GXBB,
GXL, GXM, and G12A SoCs) out of the meson_dw_hdmi DRM driver and into a
dedicated generic PHY driver.
Until now, meson_dw_hdmi directly manipulated the HHI system controller
registers (HHI_HDMI_PHY_CNTL0..5) to configure analog parameters, toggle
resets, and manage power states, as well as manually ungating HDMI
clocks and power domains already described in the DT.
By extracting this logic into a standalone PHY driver under
drivers/phy/amlogic/:
- Hardware representation in the DT is cleaner, modeling the HDMI TX PHY
as a child node of the HHI syscon referenced via standard "phys" and
"phy-names" properties.
- The DRM bridge driver relies on the standard generic PHY API
(phy_init, phy_configure, phy_power_on/off, phy_exit) rather than
touching syscon registers directly.
- Legacy DTs lacking the "phys" property remain supported via a
temporary fallback helper (meson_hdmi_phy_create_legacy) to preserve
backward compatibility to be removed on next phase of component
removal.
Overview of the series:
- Patches 1-3: Fix compatible matching in meson-gx-hhi-sysctrl bindings,
add the new amlogic,meson-hdmi-tx-phy DT schema, and allow the
"hdmi-phy" child node under the HHI syscon.
- Patch 4: Add the new Meson HDMI TX PHY driver implementing the HDMI
PHY configuration ops, along with the temporary legacy creation
helper.
- Patch 5: Document the optional "phys" and "phy-names" properties in
the amlogic,meson-dw-hdmi binding.
- Patches 6-7: Clean up manual HHI clock/power-domain writes in
meson_dw_hdmi (relying on runtime PM instead) and convert the driver
to use the generic PHY framework.
- Patches 8-10: Add the "hdmi-phy" child node and wire up the "phys"
phandle for G12, GXBB, and GXL Device Trees.
Tested on:
- Khadas VIM1 (GXL)
- dtbs_check and dt_binding_check run cleanly with no new warnings.
Signed-off-by: Ronald Claveau <linux-kernel-dev@xxxxxxxx>
---
Ronald Claveau (10):
dt-bindings: soc: amlogic: meson-gx-hhi-sysctrl: Fix compatible matching in conditionals
dt-bindings: phy: amlogic: Add Meson HDMI TX PHY binding
dt-bindings: soc: amlogic: meson-gx-hhi-sysctrl: Add hdmi-phy child node
phy: amlogic: Add Meson HDMI TX PHY driver
dt-bindings: display: amlogic,meson-dw-hdmi: Add phys and phy-names
drm/meson: dw-hdmi: Drop manual HHI clock and memory PD setup
drm/meson: dw-hdmi: Use the generic PHY framework for the HDMI TX PHY
arm64: dts: amlogic: Add HDMI TX PHY node for G12
arm64: dts: amlogic: Add HDMI TX PHY node for GXBB
arm64: dts: amlogic: Add HDMI TX PHY node for GXL
.../bindings/display/amlogic,meson-dw-hdmi.yaml | 8 +
.../bindings/phy/amlogic,meson-hdmi-tx-phy.yaml | 33 +++
.../soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml | 43 ++-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 7 +
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 7 +
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 7 +
drivers/gpu/drm/meson/Kconfig | 1 +
drivers/gpu/drm/meson/meson_dw_hdmi.c | 203 ++++++--------
drivers/phy/amlogic/Kconfig | 11 +
drivers/phy/amlogic/Makefile | 1 +
drivers/phy/amlogic/phy-meson-hdmi-tx.c | 309 +++++++++++++++++++++
include/linux/phy/phy-meson-hdmi-tx.h | 19 ++
12 files changed, 513 insertions(+), 136 deletions(-)
---
base-commit: 6d582d78fad9d828e575ca0cdcff8ea47a77220b
change-id: 20261115-meson-drm-create-hdmitx-phy-4ac40a654d09
Best regards,
--
Ronald Claveau <linux-kernel-dev@xxxxxxxx>