[PATCH net-next 0/2] net: ti: icssg: Multi-flow RX and ethtool RX flow classification
From: Meghana Malladi
Date: Wed Nov 18 2026 - 13:50:14 EST
This series adds multi-flow RX support to the ICSSG ethernet driver and
exposes it via ethtool RX flow classification (rxnfc).
Patch (1/2): restructures the driver to support up to 8 independent RX flows
per EMAC interface. Each flow gets its own NAPI instance, IRQ, hrtimer,
page pool, and XDP/AF_XDP context while sharing a single UDMA channel and
descriptor pool. AF_XDP zero-copy is updated to track per-flow pools via a
bitmap, and per-flow page pool recycling is fixed by storing the flow_id in
prueth_swdata.
Patch (2/2): adds ethtool ETHTOOL_SRXCLSRLINS/SRXCLSRLDEL/SRXCLSRLALL support.
Rules match on EtherType (ETHER_FLOW) and steer matched frames to a
user-specified RX queue via ICSSG FT3 hardware content filters and the
16-entry classifier table. The classifier N result maps directly to UDMA
flow rx_flow_id_base+N, so queue steering takes effect in hardware without
per-packet CPU involvement.
Tested on AM64x EVM (SR2), both eth1 (PRU0/slice0) and eth2
(PRU1/slice1) with 8 RX flows. Verified via /proc/interrupts IRQ deltas
RFC: https://lore.kernel.org/all/20261103134501.4123194-1-m-malladi@xxxxxx/
Meghana Malladi (2):
net: ti: icssg-prueth: Add multi-flow RX support with per-flow NAPI
net: ti: icssg-prueth: Add ethtool RX flow classification support
.../net/ethernet/ti/icssg/icssg_classifier.c | 407 ++++++++++++++++++
drivers/net/ethernet/ti/icssg/icssg_common.c | 380 +++++++++-------
drivers/net/ethernet/ti/icssg/icssg_config.h | 7 +-
drivers/net/ethernet/ti/icssg/icssg_ethtool.c | 77 +++-
drivers/net/ethernet/ti/icssg/icssg_prueth.c | 336 ++++++++-------
drivers/net/ethernet/ti/icssg/icssg_prueth.h | 95 ++--
.../net/ethernet/ti/icssg/icssg_prueth_sr1.c | 266 ++++++++++--
7 files changed, 1189 insertions(+), 379 deletions(-)
base-commit: d6816d9a93b66a12bf01e10037e377f3333ad6cc
--
2.43.0