[PATCH v2] riscv: dts: spacemit: k1: add PowerVR GPU device node

From: Iker Pedrosa

Date: Wed Nov 18 2026 - 14:00:01 EST


Add PowerVR Rogue GPU device node for SpacemiT K1 SoC.

The GPU is integrated within the SoC and enabled by default.

Signed-off-by: Iker Pedrosa <ikerpedrosam@xxxxxxxxx>
---
Add PowerVR Rogue GPU (BXE-2-32) device tree node for SpacemiT K1 SoC.

This series depends on:
- Yixun Lan's power domain series [1], which provides the genpd-based
GPU power domain driver required for proper power sequencing.
- Baihui Liang's dt-bindings patch [2], which adds the spacemit,k1-gpu
compatible string to the img,powervr-rogue binding.

The GPU firmware is not yet available upstream. A copy can be found
at [3].

With this series applied on top of [1] and [2], the full GPU bring-up
path works end-to-end on hardware:
- Power domain: GPU power island on/off via APMU
- Clock: GPU clock enabled/gated through CCU
- Reset: GPU reset line deasserted
- Firmware: PowerVR RISC-V firmware loads and signals ready
- DMA: dma-ranges correctly maps CPU-to-GPU physical addresses
- DRM: kernel exposes /dev/dri/card0 and /dev/dri/renderD128
- IRQ: GPU interrupt registered, firmware watchdog running

Userspace rendering requires Mesa's PowerVR Vulkan driver
(imagination-experimental).

[1] https://lore.kernel.org/linux-riscv/20261008-04-k3-pm-support-v2-0-6f778a53dd2d@xxxxxxxxxx/
[2] https://lore.kernel.org/linux-riscv/20261015-spacemit-gpu-binding-v1-1-a7a23c7e7788@xxxxxxxxxxxxxxxxxx/
[3] https://gitlab.freedesktop.org/imagination/linux-firmware/-/blob/powervr/powervr/rogue_36.29.52.182_v1.fw
---
Changes in v2:
- Removed board-specific enablement (GPU now enabled by default in SoC)
- Simplified commit message as per maintainer feedback
- Dropped redundant status = "disabled" from GPU node
- Link to v1: https://lore.kernel.org/r/20261015-orangepi-gpu-v1-0-03566a615660@xxxxxxxxx
---
arch/riscv/boot/dts/spacemit/k1.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index 3fabfd34114b..7f2573d869ca 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -5,6 +5,7 @@

#include <dt-bindings/clock/spacemit,k1-syscon.h>
#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/spacemit,k1-power.h>

#include "k1-pdma.h"

@@ -1119,6 +1120,16 @@ multimedia-bus {
#size-cells = <2>;
dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>,
<0x0 0x80000000 0x1 0x00000000 0x3 0x80000000>;
+
+ gpu: gpu@cac00000 {
+ compatible = "spacemit,k1-gpu", "img,img-bxe-2-32", "img,img-rogue";
+ reg = <0x0 0xcac00000 0x0 0x80000>;
+ interrupts = <75>;
+ clocks = <&syscon_apmu CLK_GPU>;
+ clock-names = "core";
+ resets = <&syscon_apmu RESET_GPU>;
+ power-domains = <&syscon_apmu K1_PMDOMAIN_GPU>;
+ };
};

network-bus {

---
base-commit: be95fa81c04dd67616faaa2872babb9ac39d4251
change-id: 20260413-orangepi-gpu-02d839d6506f

Best regards,
--
Iker Pedrosa <ikerpedrosam@xxxxxxxxx>