Re: [PATCH 05/10] dt-bindings: display: amlogic,meson-dw-hdmi: Add phys and phy-names

From: linux-kernel-dev

Date: Wed Nov 18 2026 - 14:11:04 EST


On 11/18/26 13:34, Neil Armstrong wrote:
> On 11/17/26 20:33, Ronald Claveau via B4 Relay wrote:
>> From: Ronald Claveau <linux-kernel-dev@xxxxxxxx>
>>
>> The HDMI TX PHY now has its own binding and driver. Describe the link
>> between the HDMI TX controller and its PHY with a "phys" property
>> holding a single phandle, named "hdmi" through "phy-names", and update
>> the example accordingly.
>>
>> The properties are optional so that existing DT, which do not describe
>> the PHY, keep validating; the driver falls back to creating the PHY
>> itself in that case.
>>
>> Signed-off-by: Ronald Claveau <linux-kernel-dev@xxxxxxxx>
>> ---
>>   .../devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml        |
>> 8 ++++++++
>>   1 file changed, 8 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-
>> dw-hdmi.yaml b/Documentation/devicetree/bindings/display/
>> amlogic,meson-dw-hdmi.yaml
>> index 416fe263ac92..5a033fec21b0 100644
>> --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-
>> hdmi.yaml
>> +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-
>> hdmi.yaml
>> @@ -108,6 +108,12 @@ properties:
>>       sound-name-prefix: true
>>   +  phys:
>> +    maxItems: 1
>> +
>> +  phy-names:
>> +    const: hdmi
>
> I don't think phys-name is necessary here.

Ok, I will drop phy-names and use NULL as name in the driver instead.

>
>> +
>>   required:
>>     - compatible
>>     - reg
>> @@ -136,6 +142,8 @@ examples:
>>           power-domains = <&pd_vpu>;
>>           #address-cells = <1>;
>>           #size-cells = <0>;
>> +        phys = <&hdmi_tx_phy>;
>> +        phy-names = "hdmi";
>>             /* VPU VENC Input */
>>           hdmi_tx_venc_port: port@0 {
>>
>


--
Best regards,
Ronald