Re: [PATCH net-next v2] net: phy: air_en8811h: use firmware loaded by the bootloader

From: patchwork-bot+netdevbpf

Date: Wed Nov 18 2026 - 20:20:15 EST


Hello:

This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:

On Thu, 12 Nov 2026 16:43:00 +0300 you wrote:
> On a Keenetic KN-1012 (MT7981) the EN8811H sits behind a port of an
> MT7531 switch. The driver has to be built in there: as a module it loads
> after DSA has validated the port against the generic PHY driver and
> failed to set it up. Built in, it probes when the Ethernet MDIO bus is
> registered, before the root filesystem is mounted, so
> request_firmware_direct() fails with -ENOENT, the PHY stays without a
> driver and the port never comes up, although the bootloader has already
> loaded and started the MD32 firmware.
>
> [...]

Here is the summary with links:
- [net-next,v2] net: phy: air_en8811h: use firmware loaded by the bootloader
https://git.kernel.org/netdev/net-next/c/89f0fb60afdb

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html