[PATCH v2] arm64: versal-net: Add SysMon and thermal zone
From: Amit Kumar Mahapatra
Date: Thu Nov 19 2026 - 00:44:43 EST
Describe the System Monitor (SysMon) block in the PMC, which provides
on-chip voltage and temperature monitoring, and use its device
temperature channel as the sensor for a thermal zone.
SysMon channel 0 is the current maximum temperature across all active
satellites.
The thermal zone has a critical trip at 125C. Passive trips and cooling
maps, voltage channels and per-satellite temperature channels depend on
the design and are left to board files.
SysMon availability depends on the design configuration, and it may not
be accessible over MMIO, so the SysMon node is disabled by default.
Boards that use it enable it.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
---
Changes in v2:
- Split out of the versal-sysmon series and sent separately, as there
is no dependency on it (Michal).
- Add status = "disabled" to the sysmon0 node (Michal).
v1: https://lore.kernel.org/all/20261102122112.1723130-6-amit.kumar-mahapatra@xxxxxxx/
arch/arm64/boot/dts/xilinx/versal-net.dtsi | 30 ++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/versal-net.dtsi b/arch/arm64/boot/dts/xilinx/versal-net.dtsi
index 9b74e59fd64a..fd976a577b18 100644
--- a/arch/arm64/boot/dts/xilinx/versal-net.dtsi
+++ b/arch/arm64/boot/dts/xilinx/versal-net.dtsi
@@ -706,6 +706,28 @@ versal_fpga: versal-fpga {
compatible = "xlnx,versal-fpga";
};
+ sysmon_temp: thermal-sensor {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&sysmon0 0>;
+ io-channel-names = "sensor-channel";
+ };
+
+ thermal-zones {
+ versal_thermal: versal-thermal {
+ polling-delay = <1000>; /* milliseconds */
+ thermal-sensors = <&sysmon_temp>;
+
+ trips {
+ ot_crit: ot-crit {
+ temperature = <125000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+ };
+ };
+
amba: axi {
compatible = "simple-bus";
bootph-all;
@@ -1004,6 +1026,14 @@ spi1: spi@f1970000 {
clock-names = "ref_clk", "pclk";
};
+ sysmon0: sysmon@f1270000 {
+ compatible = "xlnx,versal-sysmon";
+ status = "disabled";
+ reg = <0 0xf1270000 0 0x4000>;
+ interrupts = <0 202 4>;
+ #io-channel-cells = <1>;
+ };
+
ttc0: timer@f1dc0000 {
compatible = "cdns,ttc";
status = "disabled";
--
2.44.4