[PATCH 0/2] media: verisilicon: Fix VDPU2 decoder error handling
From: Arun Iyengar via B4 Relay
Date: Thu Nov 19 2026 - 01:20:18 EST
The VDPU2 decoder reports failed decodes as done and is not reset
after an error, so it can keep accessing freed buffers.
Tested on an Orange Pi 5 (RK3588S), KASAN v7.3 based kernel: 72 H.264
fluster runs, no IOMMU faults or stalls; with patch 1 alone, an earlier
run faulted. The VP8 test vectors pass (61/61). Two H.264 vectors
(FI1_Sony_E, MR8_BT_B) fail in 1 to 4 of 249 runs each, with patch 1
alone as with both. Build-tested on media next. MPEG-2, RK3399 and
RK3568 untested.
Independent of "Recover the Rockchip VPUs from faults and timeouts"
v3 [1]; the two only conflict in one #include line.
Developed with Claude (Anthropic), which wrote the code and the commit
messages. I reviewed every change.
[1] https://lore.kernel.org/r/20261113-hantro-robust-v3-0-82383c722ad2@xxxxxxxxx
Signed-off-by: Arun Iyengar <aiyengar1990@xxxxxxxxx>
---
Arun Iyengar (2):
media: verisilicon: Don't report VDPU2 decoder errors as success
media: verisilicon: Reset the VDPU2 decoder after an error
.../media/platform/verisilicon/rockchip_vpu_hw.c | 23 +++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
---
base-commit: aa0f4c41d4870a18e65772a1817af16427200371
change-id: 20261115-vdpu2-errreset-8688700393a3
Best regards,
--
Arun Iyengar <aiyengar1990@xxxxxxxxx>