Re: [PATCH 0/4] Suspend-to-RAM fixes for RK3588 + SPI-connected RK806 PMIC, enable PMIC sleep on RK3588 Tiger
From: Jakob Unterwurzacher
Date: Thu Nov 19 2026 - 04:13:01 EST
Hi Quentin, thanks for looking at this!
On 10/29/26 20:31, Quentin Schulz wrote:
Hi Jakob,
On 10/29/26 11:06 AM, Jakob Unterwurzacher wrote:
This series, together with a few out-of-tree patches (see below), makes
suspend-to-RAM on RK3588-Tiger work, down to a power consumption of
about 0.4 W. Patches 1-3 apply to all boards with an RK806 PMIC
connected via SPI, which includes most RK3588 boards.
Patch 1 ("Input: rk805-pwrkey - enable the wakeup interrupt during system suspend")
arms the power key interrupt as a wakeup source, so that the
power key can wake up the system. This is done in the regular suspend
phase, because the SPI bus to the PMIC can no longer be used in the
noirq phase.
Patch 2 ("mfd: rk8xx-core: keep the PMIC interrupt disabled during system suspend")
keeps the PMIC interrupt disabled across system suspend, so that its
handler does not run before the bus to the PMIC has resumed.
Patch 3 ("mfd: rk8xx-spi: add system sleep PM ops")
hooks up the existing rk8xx suspend/resume callbacks for the SPI
variant, which so far lacked them.
Patch 4 ("arm64: dts: rockchip: put the PMIC into sleep mode in suspend on RK3588 Tiger")
configures the RK806 PWRCTRL1 pin on RK3588 Tiger for its sleep
function, so that the regulator suspend states take effect. This lowers
the module's power consumption in suspend-to-RAM from 1.09 W to 0.43 W.
The patches do not depend on each other and can be applied through
their respective trees.
Then have them in separate series. Series should be as small as possible, down to a single commit if possible.
I'll split it into tree (1, 2+3, 4).
1) Upstream TF-A does not complete suspend-to-RAM on this board yet, so the
tests used Rockchip's BL31 (rkbin v1.47), configured through a small
out-of-tree driver. The plan is to get suspend working in TF-A instead.
I'm guessing you(r LLM) meant upstream TF-A here? Or what is it that you mean?
Yes, both my LLM and me meant upstream TF-A.
2) The inno-usb2 PHY has to be resumed when its 480 MHz clock is enabled,
otherwise EHCI/OHCI resume hangs. This is addressed by Sebastian
Reichel's inno-usb2 series [1].
Having access to your downstream branch, you have a patch generated by your LLM and not Sebastian's patch series. Either use what Sebastian posted, or be more careful in your choice of words as I read the above as implying you used his series.
I have now pulled in Sebastian's patch series instead and posted a Tested-By ( https://lore.kernel.org/lkml/ae532396-557b-4a0b-b13c-920a971962b8@xxxxxxxxx/ ).
Known issues
------------
PCIe devices do not survive resume; this depends on system PM
support in pcie-dw-rockchip [2].
[2] https://eur02.safelinks.protection.outlook.com/? url=https%3A%2F%2Flore.kernel.org%2Fr%2F20260316-rockchip-pcie-system- suspend- v5-0-5bb5ad37d643%40collabora.com&data=05%7C02%7Cjakob.unterwurzacher%40cherry.de%7C464ac9f060054aad6eb808df35f33f19%7C5e0e1b5221b54e7b83bb514ec460677e%7C0%7C0%7C639288990982194241%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=cg2d38YMtjlOG4gFsyy7LYI%2FWi4RFRUuHL8QjVL0DJg%3D&reserved=0
There already is a v6 from almost two months ago. Did you actually test with the v5 or are you just hinting at what could be helping resume PCIe devices?
I'm sure Sebastian would be happy to receive a nice Tested-by tag if you did indeed test that.
I was just hinting.
It was merged in the meantime ( https://lore.kernel.org/linux-pci/179407115382.87267.12160393716568806842.b4-ty@b4/ ) and I have now also pulled it into my local tree. It solves the problem.
All your patches are missing the Signed-off-by, required to signify DCO[1]. LLMs are forbidden to add it, so I guess you missed that when reviewing the patches before sending. Please triple check that you agree to all criteria listed in the documentation before adding the SoB to patches generated by LLMs[2].Well, that's embarrassing.
"b4 prep --check" came back clean, so I assumed that b4 adds the Signed-off-by.
But, as it turns out, "b4 prep --check" does not actually work.
I have reported this as https://lore.kernel.org/all/a37b228f-0d12-4c26-b29b-51ad59bc6d1a@xxxxxxxxx/ .
Thanks for the links, I have triple-checked.
Best regards,
Jakob