Re: [PATCH net-next v4 0/2] net: dsa: mxl-gsw1xx: reset the switch through reset-gpios
From: patchwork-bot+netdevbpf
Date: Thu Nov 19 2026 - 05:30:16 EST
Hello:
This series was applied to netdev/net-next.git (main)
by Paolo Abeni <pabeni@xxxxxxxxxx>:
On Sun, 15 Nov 2026 17:33:44 -0500 you wrote:
> The GSW1xx driver never resets the switch, and the MDIO core does not
> handle reset-gpios for non-PHY devices, so the driver works with whatever
> the bootloader configured. On the GL.iNet GL-SFT1200 (Siflower SF19A2890 +
> GSW150), nothing answers at internal MDIO address 0 after the bootloader,
> and each port's address answers with the neighboring port's PHY, so the
> WAN port has no PHY. Describing the PHYs at the addresses they answer at
> is not enough: with them at 1 to 3 and no reset, neither LAN port passes
> traffic. A hardware reset puts the switch back in its power-on state, as
> GL.iNet's own firmware does from Linux.
>
> [...]
Here is the summary with links:
- [net-next,v4,1/2] dt-bindings: net: dsa: lantiq,gswip: add reset-gpios
https://git.kernel.org/netdev/net-next/c/98b599217570
- [net-next,v4,2/2] net: dsa: mxl-gsw1xx: reset the switch through reset-gpios
https://git.kernel.org/netdev/net-next/c/839a787e9ba9
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html