Re: [PATCH v2 0/3] usb: dwc3: qcom: Keep USB 2.0 working in DisplayPort-only modes

From: Joonhoe Kim

Date: Thu Nov 19 2026 - 07:46:59 EST


On Thu, Nov 12, 2026 at 06:54:48PM -0800, Peter Chen wrote:
> We did an internal discussion for this use case, we may prefer the solution
> that let the PHY notify the controller this PHY lane is going to change from
> USB to DP (4lane) event, it could keep driver independent with dts for this
> feature.

Thanks, Peter. I kept the mode switch in v4 and explained why in its
cover letter. The Type-C mux framework already calls each mode switch
linked from the connector, and with the usual graph (HS port to the
controller, SS port to the PHY) the controller is called before the PHY
changes lanes, so no new interface between the PHY and the controller is
needed. The cost is a "mode-switch" property on each controller node,
which a notification from the PHY would avoid. If you settle on that,
the clock selection in patch 2 can be driven from it instead.

v4: https://lore.kernel.org/all/20261119124558.1548-1-26rote@xxxxxxxxx/

Thanks,
Joonhoe Kim