[PATCH 03/10] iio: accel: adxl313: Reject sub-base ODR codes in adxl313_read_raw()

From: Lee Jones

Date: Thu Nov 19 2026 - 10:33:13 EST


When reading IIO_CHAN_INFO_SAMP_FREQ, adxl313_read_raw() extracts the
4-bit rate field (0..15) from ADXL313_REG_BW_RATE and subtracts
ADXL313_RATE_BASE (6) to index adxl313_odr_freqs[].

ADXL312 and ADXL314 support sub-6.25 Hz rate codes 0..5 and do not
perform a soft reset during setup, and debugfs register writes or a
faulty bus read can likewise yield codes below ADXL313_RATE_BASE. When
that happens, subtracting ADXL313_RATE_BASE produces a negative index
and reads before the start of adxl313_odr_freqs[].

Return -EINVAL if the rate field is below ADXL313_RATE_BASE.

Fixes: 636d44633039 ("iio: accel: Add driver support for ADXL313")
Closes: https://sashiko.dev/#/bug/linux-d6086ee0-d732-43b6-b8ac-24e5bf86a9f8
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Lee Jones <lee@xxxxxxxxxx>
---
drivers/iio/accel/adxl313_core.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c
index 72ef8652d398..811218953c2a 100644
--- a/drivers/iio/accel/adxl313_core.c
+++ b/drivers/iio/accel/adxl313_core.c
@@ -647,7 +647,11 @@ static int adxl313_read_raw(struct iio_dev *indio_dev,
if (ret)
return ret;

- ret = FIELD_GET(ADXL313_RATE_MSK, regval) - ADXL313_RATE_BASE;
+ regval = FIELD_GET(ADXL313_RATE_MSK, regval);
+ if (regval < ADXL313_RATE_BASE)
+ return -EINVAL;
+
+ ret = regval - ADXL313_RATE_BASE;
*val = adxl313_odr_freqs[ret][0];
*val2 = adxl313_odr_freqs[ret][1];
return IIO_VAL_INT_PLUS_MICRO;
--
2.56.1.708.g77570a6a1d-goog