Re: [PATCH 00/10] phy/drm: amlogic: Extract Meson HDMI TX PHY into a dedicated driver
From: linux-kernel-dev
Date: Thu Nov 19 2026 - 10:34:14 EST
On 11/19/26 08:58, Neil Armstrong wrote:
> On 11/18/26 20:35, linux-kernel-dev@xxxxxxxx wrote:
>> On 11/18/26 13:38, Neil Armstrong wrote:
>>> Hi,
>>>
>>> On 11/17/26 20:33, Ronald Claveau via B4 Relay wrote:
>>>> This series moves the Amlogic Meson HDMI TX PHY handling (covering
>>>> GXBB,
>>>> GXL, GXM, and G12A SoCs) out of the meson_dw_hdmi DRM driver and into a
>>>> dedicated generic PHY driver.
>>>>
>>>> Until now, meson_dw_hdmi directly manipulated the HHI system controller
>>>> registers (HHI_HDMI_PHY_CNTL0..5) to configure analog parameters,
>>>> toggle
>>>> resets, and manage power states, as well as manually ungating HDMI
>>>> clocks and power domains already described in the DT.
>>>>
>>>> By extracting this logic into a standalone PHY driver under
>>>> drivers/phy/amlogic/:
>>>> - Hardware representation in the DT is cleaner, modeling the HDMI TX
>>>> PHY
>>>> as a child node of the HHI syscon referenced via standard "phys"
>>>> and
>>>> "phy-names" properties.
>>>> - The DRM bridge driver relies on the standard generic PHY API
>>>> (phy_init, phy_configure, phy_power_on/off, phy_exit) rather than
>>>> touching syscon registers directly.
>>>> - Legacy DTs lacking the "phys" property remain supported via a
>>>> temporary fallback helper (meson_hdmi_phy_create_legacy) to
>>>> preserve
>>>> backward compatibility to be removed on next phase of component
>>>> removal.
>>>>
>>>> Overview of the series:
>>>> - Patches 1-3: Fix compatible matching in meson-gx-hhi-sysctrl
>>>> bindings,
>>>> add the new amlogic,meson-hdmi-tx-phy DT schema, and allow the
>>>> "hdmi-phy" child node under the HHI syscon.
>>>> - Patch 4: Add the new Meson HDMI TX PHY driver implementing the HDMI
>>>> PHY configuration ops, along with the temporary legacy creation
>>>> helper.
>>>> - Patch 5: Document the optional "phys" and "phy-names" properties in
>>>> the amlogic,meson-dw-hdmi binding.
>>>> - Patches 6-7: Clean up manual HHI clock/power-domain writes in
>>>> meson_dw_hdmi (relying on runtime PM instead) and convert the
>>>> driver
>>>> to use the generic PHY framework.
>>>> - Patches 8-10: Add the "hdmi-phy" child node and wire up the "phys"
>>>> phandle for G12, GXBB, and GXL Device Trees.
>>>>
>>>> Tested on:
>>>> - Khadas VIM1 (GXL)
>>>> - dtbs_check and dt_binding_check run cleanly with no new warnings.
>>>>
>>>> Signed-off-by: Ronald Claveau <linux-kernel-dev@xxxxxxxx>
>>>> ---
>>>> Ronald Claveau (10):
>>>> dt-bindings: soc: amlogic: meson-gx-hhi-sysctrl: Fix compatible
>>>> matching in conditionals
>>>> dt-bindings: phy: amlogic: Add Meson HDMI TX PHY binding
>>>> dt-bindings: soc: amlogic: meson-gx-hhi-sysctrl: Add hdmi-phy
>>>> child node
>>>> phy: amlogic: Add Meson HDMI TX PHY driver
>>>> dt-bindings: display: amlogic,meson-dw-hdmi: Add phys and phy-
>>>> names
>>>> drm/meson: dw-hdmi: Drop manual HHI clock and memory PD setup
>>>> drm/meson: dw-hdmi: Use the generic PHY framework for the HDMI
>>>> TX PHY
>>>> arm64: dts: amlogic: Add HDMI TX PHY node for G12
>>>> arm64: dts: amlogic: Add HDMI TX PHY node for GXBB
>>>> arm64: dts: amlogic: Add HDMI TX PHY node for GXL
>>>>
>>>> .../bindings/display/amlogic,meson-dw-hdmi.yaml | 8 +
>>>> .../bindings/phy/amlogic,meson-hdmi-tx-phy.yaml | 33 +++
>>>> .../soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml | 43 ++-
>>>> arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 7 +
>>>> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 7 +
>>>> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 7 +
>>>> drivers/gpu/drm/meson/Kconfig | 1 +
>>>> drivers/gpu/drm/meson/meson_dw_hdmi.c | 203 +++++
>>>> +--------
>>>> drivers/phy/amlogic/Kconfig | 11 +
>>>> drivers/phy/amlogic/Makefile | 1 +
>>>> drivers/phy/amlogic/phy-meson-hdmi-tx.c | 309 +++++++++++
>>>> ++++++++++
>>>> include/linux/phy/phy-meson-hdmi-tx.h | 19 ++
>>>> 12 files changed, 513 insertions(+), 136 deletions(-)
>>>> ---
>>>> base-commit: 6d582d78fad9d828e575ca0cdcff8ea47a77220b
>>>> change-id: 20261115-meson-drm-create-hdmitx-phy-4ac40a654d09
>>>>
>>>> Best regards,
>>>> --
>>>> Ronald Claveau <linux-kernel-dev@xxxxxxxx>
>>>
>>> Overall it's very good, but I would've prefered a more sequencial move
>>> to the PHY driver, with an exact copy of the code and simplification
>>> towards the current PHY code.
>>>
>>> Anyway, the sashiko review comments are good, especially the one on
>>> patch 6 to keep the driver working on old DTs, sorry my bad...
>>>
>>> Neil
>>
>> Thanks for your feedback, I am analyzing/testing sashiko feedback.
>>
>> About the suspend/resume unbind/bind, I do not have any issue on my
>> side, but I can change the orders.
>>
>> About patch 6 and the old DTs, I will reintroduce them with the legacy
>> check. Do you know what would be a good timeline to add a require on
>> those elements and drop the fallback code ?
>>
>
> The problem is not necessarily the kernel DT but the U-Boot DT which
> could be used by the kernel.
>
> The U-Boot DT was using v6.2 before v2024.07 and after it uses the
> synchronized
> DT from Linux, which coincides with the v6.11 DT which contains the DT
> clocks
> changes.
>
> It seems most of the SBCs distro uses recent U-Boot versions, and some
> nice distro
> ships older U-Boot version, so it could break on those if a new kernel
> was deployed.
>
> But, U-Boot already set HHI_HDMI_CLK_CNTL and HHI_MEM_PD_REG0 when
> probing dw_hdmi
> since 2019.04 so considering that I thing the risk is super low.
>
> Add this to your commit message and send a v2.
Crystal clear, will add that in v2.
--
Best regards,
Ronald