[PATCH 3/3] arm64: zynqmp: dts: Add USB hub supply regulators to SOMs

From: Michal Simek

Date: Thu Nov 19 2026 - 10:42:32 EST


From: Shaikh Mohammed Suhan <suhan.sm@xxxxxxx>

Add fixed supply regulators for the onboard USB hub (USB5744).

The USB hub requires two always-on power rails:
- vdd: 3.3V main supply
- vdd2: auxiliary supply

Model these rails as fixed regulators and reference them from the hub
node to accurately describe the hardware.

Signed-off-by: Shaikh Mohammed Suhan <suhan.sm@xxxxxxx>
Signed-off-by: Michal Simek <michal.simek@xxxxxxx>
---

.../boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso | 20 +++++++++++++++++
.../boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso | 22 +++++++++++++++++++
.../boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso | 22 +++++++++++++++++++
.../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 20 +++++++++++++++++
.../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 20 +++++++++++++++++
5 files changed, 104 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
index d20b6ea2ad0b..ba5d761805a7 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
@@ -50,6 +50,24 @@ slg_delay: enable-delay {
gpio-controller;
gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
};
+
+ vdd_usb_hub: regulator-vdd-usb-hub {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_usb_hub";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd2_usb_hub: regulator-vdd2-usb-hub {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd2_usb_hub";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};

&can0 {
@@ -123,6 +141,8 @@ hub_2_0: hub@1 {
peer-hub = <&hub_3_0>;
i2c-bus = <&hub>;
reset-gpios = <&slg_delay 0 10000 10000>;
+ vdd-supply = <&vdd_usb_hub>;
+ vdd2-supply = <&vdd2_usb_hub>;
};

/* 3.0 hub on port 2 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
index b3084f44a4ca..791ae9954173 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
@@ -86,6 +86,24 @@ slg_delay: enable-delay {
gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>,
<&slg7xl45106 4 GPIO_ACTIVE_LOW>;
};
+
+ vdd_usb_hub: regulator-vdd-usb-hub {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_usb_hub";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd2_usb_hub: regulator-vdd2-usb-hub {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd2_usb_hub";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};

&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
@@ -194,6 +212,8 @@ hub_2_0: hub@1 {
peer-hub = <&hub_3_0>;
i2c-bus = <&hub_1>;
reset-gpios = <&slg_delay 0 10000 10000>;
+ vdd-supply = <&vdd_usb_hub>;
+ vdd2-supply = <&vdd2_usb_hub>;
};

/* 3.0 hub on port 2 */
@@ -232,6 +252,8 @@ hub1_2_0: hub@1 {
peer-hub = <&hub1_3_0>;
i2c-bus = <&hub_2>;
reset-gpios = <&slg_delay 1 10000 10000>;
+ vdd-supply = <&vdd_usb_hub>;
+ vdd2-supply = <&vdd2_usb_hub>;
};

/* 3.0 hub on port 2 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
index fdb6eae87eb9..b9ae01cddcae 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
@@ -87,6 +87,24 @@ slg_delay: enable-delay {
gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>,
<&slg7xl45106 4 GPIO_ACTIVE_LOW>;
};
+
+ vdd_usb_hub: regulator-vdd-usb-hub {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_usb_hub";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd2_usb_hub: regulator-vdd2-usb-hub {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd2_usb_hub";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};

&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
@@ -195,6 +213,8 @@ hub_2_0: hub@1 {
peer-hub = <&hub_3_0>;
i2c-bus = <&hub_1>;
reset-gpios = <&slg_delay 0 10000 10000>;
+ vdd-supply = <&vdd_usb_hub>;
+ vdd2-supply = <&vdd2_usb_hub>;
};

/* 3.0 hub on port 2 */
@@ -233,6 +253,8 @@ hub1_2_0: hub@1 {
peer-hub = <&hub1_3_0>;
i2c-bus = <&hub_2>;
reset-gpios = <&slg_delay 1 10000 10000>;
+ vdd-supply = <&vdd_usb_hub>;
+ vdd2-supply = <&vdd2_usb_hub>;
};

/* 3.0 hub on port 2 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index 09ed585cf91d..9b37cff42e26 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -85,6 +85,24 @@ slg_delay: enable-delay {
gpio-controller;
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
+
+ vdd_usb_hub: regulator-vdd-usb-hub {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_usb_hub";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd2_usb_hub: regulator-vdd2-usb-hub {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd2_usb_hub";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};

&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
@@ -167,6 +185,8 @@ hub_2_0: hub@1 {
reg = <1>;
peer-hub = <&hub_3_0>;
reset-gpios = <&slg_delay 0 10000 10000>;
+ vdd-supply = <&vdd_usb_hub>;
+ vdd2-supply = <&vdd2_usb_hub>;
};

/* 3.0 hub on port 2 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index 50f451bcc7aa..657aa73f741c 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -81,6 +81,24 @@ slg_delay: enable-delay {
gpio-controller;
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
+
+ vdd_usb_hub: regulator-vdd-usb-hub {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_usb_hub";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd2_usb_hub: regulator-vdd2-usb-hub {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd2_usb_hub";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};

&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
@@ -154,6 +172,8 @@ hub_2_0: hub@1 {
peer-hub = <&hub_3_0>;
i2c-bus = <&hub>;
reset-gpios = <&slg_delay 0 10000 10000>;
+ vdd-supply = <&vdd_usb_hub>;
+ vdd2-supply = <&vdd2_usb_hub>;
};

/* 3.0 hub on port 2 */
--
2.43.0