[PATCH v3 08/10] arm64: dts: qcom: sm8250-lg-timelm: add SW42902 touchscreen

From: Abdur Rofik

Date: Thu Nov 19 2026 - 11:55:53 EST


Describe the SW42902 touchscreen on GENI I2C13 with its interrupt,
reset, regulator supplies, pinctrl, and native 1080x2460 touch area.

Signed-off-by: Abdur Rofik <rofikcoga@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts | 48 +++++++++++++++++++
1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts b/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts
index 59d6c1518a469..160b6f4c98b17 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts
@@ -107,6 +107,24 @@ vph_pwr: vph-pwr-regulator {
regulator-always-on;
regulator-boot-on;
};
+
+ reg_ts_vcl: regulator-ts-vcl {
+ compatible = "regulator-fixed";
+ regulator-name = "reg_ts_vcl";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pm8150_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_ts_vdd: regulator-ts-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "reg_ts_vdd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};

&apps_rsc {
@@ -461,6 +479,29 @@ &gpu_zap_shader {
firmware-name = "qcom/sm8250/LG/timelm/a650_zap.mbn";
};

+&i2c13 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ touchscreen@48 {
+ compatible = "lg,sw42902";
+ reg = <0x48>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <39 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_default>;
+
+ reset-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ vcl-supply = <&reg_ts_vcl>;
+ vdd-supply = <&reg_ts_vdd>;
+
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <2460>;
+ };
+};
+
&mdss {
status = "okay";
};
@@ -580,6 +621,13 @@ sdc2_card_det_n: sd-card-det-n-state {
drive-strength = <2>;
bias-pull-up;
};
+
+ ts_int_default: ts-int-default-state {
+ pins = "gpio39";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
};

&uart12 {
--
2.39.5