Re: [PATCH v8 0/2] Add UFS Host driver support for SpacemiT K3 SoC

From: Aurelien Jarno

Date: Thu Nov 19 2026 - 11:56:31 EST


Hi,

On 2026-11-18 23:38, E Shattow wrote:
> I was missing this detail previously. For testing again of v8 I have now
> inserted a sed pipe to change this as suggested for the dts application
> step of the build procedure:
>
> b4 am -v5 -P3 -o- \
> https://lore.kernel.org/all/20260916-08-k3-ufs-support-v5-0-1f5d71f1027d@xxxxxxxxxx/ \
> | sed -z 's%\(clock-names = "axi", "\)ref\(";\)%\1ref_clk\2%' \
> | patch -p1
>
> Additionally to the build procedure, since Debian testing now features
> linux-config-7.3 and no longer linux-config-7.2, I now substitute
> accordingly from linux-config-7.2 to linux-config-7.3

[...]

> $ journalctl --dmesg | grep ufshcd
> ufshcd-spacemit c0e00000.ufshc: freq-table-hz property not specified
> ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
> vdd-hba-supply regulator, assuming enabled
> ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
> vcc-supply regulator, assuming enabled
> ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
> vccq-supply regulator, assuming enabled
> ufshcd-spacemit c0e00000.ufshc: ufshcd_populate_vreg: Unable to find
> vccq2-supply regulator, assuming enabled
> scsi host0: ufshcd
> ufshcd-spacemit c0e00000.ufshc: ufshcd_scsi_add_wlus: BOOT WLUN not found

All those are expected, so it's great that the issue you reported is
fixed.

> I did not again see the DL error event. However, the first attempt to
> build Linux does fail:
>
> make[7]: *** [scripts/Makefile.build:572: drivers/gpu/drm] Error 2
> make[6]: *** [scripts/Makefile.build:572: drivers/gpu] Error 2
> ...
> make[5]: *** [scripts/Makefile.build:572: drivers] Error 2
> make[4]: *** [Makefile:2244: .] Error 2
> make[3]: *** [debian/rules:80: build-arch] Error 2
> dpkg-buildpackage: error: make -f debian/rules binary subprocess failed
> with exit status 2
> make[2]: *** [scripts/Makefile.package:126: bindeb-pkg] Error 2
> make[1]: *** [/home/es/linux-7.4-rc3/Makefile:1852: bindeb-pkg] Error 2
> make: *** [Makefile:248: __sub-make] Error 2
>
> real 188m48.844s
> user 1415m17.363s
> sys 66m11.932s

I guess the error is some GCC ICE.

> Linux is running on the K3 SoC here without clocks preparation from the
> bootloader; it is quite slow by comparison to a Linux kernel that
> follows clock preparations by the vendor BSP bootloader. Simply
> re-running the same "make ..." build command is successful in the same
> system without any changes:
>
> DEPMOD debian/linux-image-7.4.0-rc3-k3ufs/lib/modules/7.4.0-rc3-k3ufs
> ...
> dpkg-deb: building package 'linux-image-7.4.0-rc3-k3ufs' in
> '../linux-image-7.4.0-rc3-k3ufs_7.4.0~rc3-2_riscv64.deb'.
> ...
> real 34m56.794s
> user 241m15.511s
> sys 18m4.532s
>
> Similar build failures occasionally happen when the root filesystem is
> on USB microSD adapter-connected microSD storage. I assume the build
> failures with default clocks configuration are not constrained to just
> the UFS support series here.

Yes, this is a known issue, unfortunately the K3 does not run stable
under load. See this thread (although it seems at the end the K1 and K3
issues are different ones):
https://lore.kernel.org/linux-riscv/apSYF5x1Tu7PlyL1@xxxxxxxxxxx/

Also see this Fedora issue:
https://forge.fedoraproject.org/riscv/planning/issues/36

Regards
Aurelien

--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurelien@xxxxxxxxxxx http://aurel32.net