Re: [PATCH v2] hwmon: (ads7871) Add error handle from spi_setup()
From: Vítor Silva
Date: Thu Nov 19 2026 - 12:09:15 EST
Thanks!
Vítor
Guenter Roeck <linux@xxxxxxxxxxxx> escreveu (quinta, 19/11/2026 à(s) 16:49):
>
> On Wed, Nov 18, 2026 at 09:29:28AM +0000, Vítor Hugo Silva wrote:
> > The ads7871 probe() ignores the spi_setup() error return value
> > and it attempts to write to registers even if spi_setup() fails.
> >
> > Return the setup error before accessing any registers.
> >
> > AI was used for peer-review the patch.
> >
> > Fixes: e0c70b8078629 ("hwmon: add TI ads7871 a/d converter driver")
> >
> > Signed-off-by: Vítor Hugo Silva <vitorhg20080@xxxxxxxxx>
>
> Applied.
>
> Thanks,
> Guenter
>
> > ---
> > Changes in v2:
> > - Clarify what happens when spi_setup() fails.
> > - Describe the fix in imperative mood.
> >
> > drivers/hwmon/ads7871.c | 4 +++-
> > 1 file changed, 3 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c
> > index 36297bc6d047..a1ffc35d9272 100644
> > --- a/drivers/hwmon/ads7871.c
> > +++ b/drivers/hwmon/ads7871.c
> > @@ -187,7 +187,9 @@ static int ads7871_probe(struct spi_device *spi)
> > /* Configure the SPI bus */
> > spi->mode = (SPI_MODE_0);
> > spi->bits_per_word = 8;
> > - spi_setup(spi);
> > + ret = spi_setup(spi);
> > + if (ret)
> > + return ret;
> >
> > pdata = devm_kzalloc_obj(dev, *pdata);
> > if (!pdata)