[PATCH v2] pwm: Drop the module reference before the chip in __pwm_put()

From: Suyuan Wang via B4 Relay

Date: Thu Nov 19 2026 - 14:28:12 EST


From: Suyuan Wang <stevewong@xxxxxxxxxxx>

__pwm_put() drops the chip reference the consumer took and then reads the
chip to drop the module reference:

put_device(&chip->dev);
module_put(chip->owner);

A consumer takes both references in pwm_device_request()
(try_module_get(chip->owner) and get_device(&chip->dev)). The chip's base
reference is released by pwmchip_put(), not by pwmchip_remove(), so a
consumer can still hold a pwm after the provider has removed and put the
chip. When that consumer finally calls pwm_put(), the put_device() here
drops the last reference, pwmchip_release() frees the chip, and
module_put(chip->owner) then reads the freed chip.

Call module_put() before put_device(). This is safe because the chip is
released by pwmchip_release() in the PWM core, not by code in the
provider module.

Found with a static analysis tool and checked by hand.

Fixes: 4c56b1434b81 ("pwm: Add a struct device to struct pwm_chip")
Cc: stable@xxxxxxxxxxxxxxx
Co-developed-by: Kaixuan Li <kaixuan.li@xxxxxxxxxx>
Signed-off-by: Kaixuan Li <kaixuan.li@xxxxxxxxxx>
Signed-off-by: Suyuan Wang <stevewong@xxxxxxxxxxx>
---
Changes in v2:
- Call module_put() before put_device() instead of reading chip->owner
into a local first (Uwe).

Compile tested on x86_64 (W=1 and sparse, no new warnings). I don't have
the hardware.

v1: https://lore.kernel.org/linux-pwm/20261119-pwm-v1-1-adeff0cc366a@xxxxxxxxx/
---
drivers/pwm/core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 4c6d716e5fde..4e8dba089261 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -2036,9 +2036,9 @@ static void __pwm_put(struct pwm_device *pwm)

pwm->label = NULL;

- put_device(&chip->dev);
-
module_put(chip->owner);
+
+ put_device(&chip->dev);
}

/**