Re: [PATCH v3 0/8] Update BSH SystemMaster device trees and add SMM-M2B support
From: Frank . Li
Date: Thu Nov 19 2026 - 16:32:08 EST
From: Frank Li <Frank.Li@xxxxxxx>
On Wed, 11 Nov 2026 17:23:16 +0800, Haoning Cheng wrote:
> Update BSH SystemMaster device trees and add SMM-M2B support
>
> Add device tree support for the BSH SMM-M2B SystemMaster, a variant
> of the SMM-M2 equipped with an AIC Wi-Fi and Bluetooth chip.
>
> This series adds the SMM-M2B board binding and device tree,
> reusing common hardware definitions shared with the SMM-M2.
>
> [...]
Applied, thanks!
[1/8] dt-bindings: arm: fsl: Add BSH SMM-M2B board
commit: 5e15733765961a9a5fbd3de00e5c2213f6b71b51
[2/8] ARM: dts: imx: Use minimum NAND ECC strength on BSH boards
commit: 2b04bfdb26b5456e621577d2c0857dcc9b690b08
[3/8] ARM: dts: imx6ulz: Adjust BSH SMM-M2 Wi-Fi and Bluetooth pin settings
commit: 3fb0f77dec1715816d826ddf602f306822894a51
[4/8] ARM: dts: imx6ulz: Pull down BSH SMM-M2 active-high WLAN IRQ
commit: d64b81a6f707d538179d0a198c30997bf6700340
[5/8] ARM: dts: imx6ulz: Factor out BSH SMM-M2 common device tree
commit: 6226c5486c85e086be8545f479f8b07db2a9b044
[6/8] ARM: dts: imx6ulz: Add BSH SMM-M2B board support
commit: 522211c675c3aa92ad0d3a046d860e4f1b0978d5
[7/8] ARM: dts: imx6ulz: Configure UART2 pins on BSH SMM-M2 variants
commit: ff35ad2e7bff17aa82b34d0df74ebd17da6232c8
[8/8] ARM: dts: imx: Enable USB OTG mode on BSH SMM-M2 and SMM-S2
commit: c0bdb8229285c9652f5a50fad97ca97c1d9894c8
Best regards,
--
Frank Li <Frank.Li@xxxxxxx>