Re: [PATCH v1 1/2] dt-bindings: usb: ti,tusb1046: document HPD_IN override
From: Rob Herring
Date: Thu Nov 19 2026 - 16:48:20 EST
On Wed, Nov 04, 2026 at 01:12:01PM +0530, Ajit Singh wrote:
> For boards where HPD_IN is not asserted by hardware, the TUSB1046
> can force it high over I2C using the HPDIN_OVERRIDE bit in the
> General register (0x0A).
>
> Document the optional ti,hpd-in-override property to force HPD_IN
> high when DisplayPort mode is selected.
>
> Signed-off-by: Ajit Singh <blfizzyy@xxxxxxxxx>
> ---
> Documentation/devicetree/bindings/usb/ti,tusb1046.yaml | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml b/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml
> index e1501ea6b50b..58e9fde3ca71 100644
> --- a/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml
> +++ b/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml
> @@ -20,6 +20,14 @@ properties:
> reg:
> maxItems: 1
>
> + ti,hpd-in-override:
> + type: boolean
> + description: |
> + Force the HPD_IN signal high through the HPDIN_OVERRIDE bit in the
> + General register while DisplayPort Alt Mode is active. This is useful
> + on boards where HPD_IN is not driven by the downstream DisplayPort
> + sink.
The existing no-hpd property doesn't work here?
Rob