[PATCH 0/2] iio: imu: inv_icm42600: keep the temperature sensor always on

From: Joe LeVeque

Date: Thu Nov 19 2026 - 21:10:53 EST


On an ICM-42688-P, the gyro shows a large, stable offset at rest (about
8 to 23 dps) whenever the driver has the temperature sensor disabled
(PWR_MGMT0.TEMP_DIS): without it, gyro data is not temperature
compensated internally. As discussed with Jean-Baptiste and Jonathan,
this series keeps the temperature sensor always on and removes the
driver's temperature enable/disable handling; temperature reporting in
the FIFO stays switchable.

The chip only measures temperature while the accel or gyro is on; with
both off, its data register keeps the last measurement. Patch 1 makes a
temperature read return -EBUSY in that case instead of stale data, so
that patch 2 can remove the enable/disable handling without changing
what a direct temperature read reports.

Discussion:
https://lore.kernel.org/linux-iio/20261118232418.7fc702a8@jic23-hlaptop/T/#t

Tested on an ICM-42688-P (SPI) on an i.MX8M Plus board: on 6.18 with
these patches backported to the 6.18 driver (minor context adjustments,
built as an external module), and on 6.6 with the driver backported
from mainline:
- gyro correct from the first reads after boot and after runtime
suspend; accel unchanged
- idle temperature read returns -EBUSY; current values whenever accel or
gyro is on
- PWR_MGMT0.TEMP_DIS never set (regmap debugfs)
- buffered capture of gyro and accel, separately and concurrently
(including stopping one while the other runs), with and without the
temperature channel, and temperature-only: correct data at 50 Hz
- repeated buffer enable/disable; module reload
Build-tested on the IIO togreg branch.

I kept the INV_ICM42600_PWR_MGMT0_TEMP_DIS definition in inv_icm42600.h,
now unused, to document the register bit; happy to drop it if you
prefer.

Joe LeVeque (2):
iio: imu: inv_icm42600: return -EBUSY for temperature reads when idle
iio: imu: inv_icm42600: remove temperature sensor enable/disable

drivers/iio/imu/inv_icm42600/inv_icm42600.h | 6 ---
.../iio/imu/inv_icm42600/inv_icm42600_accel.c | 16 ++------
.../imu/inv_icm42600/inv_icm42600_buffer.c | 14 ++-----
.../iio/imu/inv_icm42600/inv_icm42600_core.c | 37 ++++---------------
.../iio/imu/inv_icm42600/inv_icm42600_gyro.c | 16 ++------
.../iio/imu/inv_icm42600/inv_icm42600_temp.c | 10 ++++-
6 files changed, 26 insertions(+), 73 deletions(-)

--
2.34.1