Re: [PATCH v5 3/3] arm64: dts: cix: Add Sky1 DP PHY node
From: Gary Yang
Date: Fri Nov 20 2026 - 00:52:03 EST
On 2026-11-16 15:38, Luo Liu wrote:
> Describe the Sky1 DP PHY in the SoC DTSI, including the DPC2 APB
> clock shared with the DisplayPort controller, so DisplayPort can
> consume it once the controller is enabled. Enable the PHY on the
> Radxa Orion O6 board.
>
> Signed-off-by: Luo Liu <Luo.Liu@xxxxxxxxxxx>
> ---
> Changes in v5:
> - No changes.
Applied, thanks!
Best Regards
Gary
>
> arch/arm64/boot/dts/cix/sky1-orion-o6.dts | 4 ++++
> arch/arm64/boot/dts/cix/sky1.dtsi | 10 ++++++++++
> 2 files changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
> index e39c87774c12..b659c10f1f4d 100644
> --- a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
> +++ b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
> @@ -36,6 +36,10 @@ linux,cma {
>
> };
>
> +&dp_phy {
> + status = "okay";
> +};
> +
> &fch_gpio0 {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
> index 0a820f45feb9..cbc14ac5b2b7 100644
> --- a/arch/arm64/boot/dts/cix/sky1.dtsi
> +++ b/arch/arm64/boot/dts/cix/sky1.dtsi
> @@ -762,6 +762,16 @@ ppi_partition1: interrupt-partition-1 {
> };
> };
>
> + dp_phy: phy@1414c000 {
> + compatible = "cix,sky1-dp-phy";
> + reg = <0x0 0x1414c000 0x0 0x4000>;
> + clocks = <&scmi_clk CLK_TREE_DPC2_APBCLK>;
> + clock-names = "apb";
> + resets = <&s5_syscon SKY1_DP_PHY_RST_N>;
> + #phy-cells = <0>;
> + status = "disabled";
> + };
> +
> s5_syscon: syscon@16000000 {
> compatible = "cix,sky1-s5-system-control", "syscon";
> reg = <0x0 0x16000000 0x0 0x1000>;
> --
> 2.25.1
>