Re: [PATCH] i2c: acpi: Limit DLL0945 100 kHz quirk to Dell Precision 5560 and XPS 15 9510

From: Mika Westerberg

Date: Fri Nov 20 2026 - 02:19:34 EST


Hi,

On Thu, Nov 19, 2026 at 03:32:16PM +0100, Paul Menzel wrote:
> Commit 0b7c9528facd ("i2c: Force DLL0945 touchpad i2c freq to 100khz")
> forces the I2C bus to 100 kHz for all devices with the ACPI ID DLL0945 to
> work around a sluggish cursor on the Dell Precision 5560. But DLL0945 does
> not identify a touchpad model. Dell uses it for touchpads from different
> vendors:
>
> System Touchpad
> Dell Precision 5560 ELAN 04F3:311C
> Dell XPS 15 9510 ELAN 04F3:311C (bugzilla #214597)
> Dell XPS 13 9310 Synaptics 06CB:CDE6
>
> The ELAN touchpads are the ones known to need 100 kHz, but the Synaptics
> touchpad of the Dell XPS 13 9310 is slowed down without need. Its DSDT
> specifies 400 kHz, and Linux logs:
>
> i2c_designware i2c_designware.0: [Firmware Bug]: DSDT uses known not-working I2C bus speed 400000, forcing it to 100000
>
> The touchpad scans every 7.1 ms (scan time field in the input report), and
> i2c-hid reads wMaxInputLength (64 bytes) for each report. Tracing the I2C
> transfers for 30 seconds of moving a finger on the touchpad shows:
>
> 100 kHz 400 kHz
> read time (median) 7.3 ms 2.5 ms
> bus busy 87 % 36 %
> reports per second 111 140
> frames lost 18.6 % 0 %
>
> At 100 kHz the host cannot keep up with the touchpad, and every fifth frame
> is lost. At 400 kHz all frames arrive, and no sluggish cursor was noticed.
>
> So, only apply the DLL0945 entry on the Dell Precision 5560 and XPS 15 9510
> by pointing the entry's driver_data to a DMI table, which can be used to
> restrict other entries in the same way.

Yeah, we should really figure out how this works in Windows. I'm sure they
don't have such a quirk list so maybe it's up to the vendor specific
drivers to "tune" the bus to their needs whereas in Linux we obey the ACPI
description.

> Tested on the Dell XPS 13 9310.
>
> - The `[Firmware Bug] … forcing it to 100000` line is gone from dmesg.
> - Re-probed the touchpad’s I²C controller with debug output on, and it
> reports `Bus speed: Fast Mode (400 kHz)`. The touchpad came back up
> under hid-multitouch.
>
> Fixes: 0b7c9528facd ("i2c: Force DLL0945 touchpad i2c freq to 100khz")
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=214597
> Cc: Hans de Goede <johannes.goede@xxxxxxxxxxxxxxxx>
> Cc: Dell.Client.Kernel@xxxxxxxx
> Signed-off-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx>

Acked-by: Mika Westerberg (Intel) <westeri@xxxxxxxxxx>