[PATCH 5/5] arm64: dts: freescale: imx93-11x11-frdm-common: Describe USB2 VBUS supply
From: Freimut Diener
Date: Fri Nov 20 2026 - 04:37:20 EST
The FRDM-i.MX93 USB2 Type-A host port receives its 5 V VBUS supply
through an SGM2526 load switch. The switch's enable input is tied to
the always-on VDD_3V3 rail, keeping VBUS enabled whenever the board
is powered.
Describe the switch output as an always-on fixed regulator and
reference it from the USB2 PHY's vbus-supply property.
This provides the PHY with its actual VBUS supply instead of
falling back to a dummy regulator, which else triggers a warning:
usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests (id=vbus)
Signed-off-by: Freimut Diener <f.diener@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi
index 617f2229b559b..eed435f6f87a7 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi
@@ -62,6 +62,14 @@ reg_pcal6524_vcc: regulator-pcal6524-vcc {
regulator-always-on;
};
+ reg_usb2_vbus: regulator-usb2-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb2-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
off-on-delay-us = <12000>;
@@ -398,6 +406,10 @@ &usbotg2 {
status = "okay";
};
+&usbphynop2 {
+ vbus-supply = <®_usb2_vbus>;
+};
+
&usdhc1 {
bus-width = <8>;
non-removable;
--
2.56.0