[PATCH net-next v4 0/5] net: stmmac: dwmac-sun8i: Fix the EPHY and MDIO mux ordering

From: Arun Iyengar via B4 Relay

Date: Fri Nov 20 2026 - 05:46:30 EST


Chen-Yu Tsai pointed out that the probe error path and remove() put the
EPHY clock and reset before sun8i_dwmac_exit() uses them (patch 1).
Sashiko and Maxime Chevallier pointed out that the EPHY lookup and the
mux registration run after register_netdev(), and Maxime suggested
registering the mux in the MDIO setup (patches 2, 4 and 5). Patch 2
replaces "Defer probe when the EPHY clock is not ready" [1]. Patch 3
balances runtime PM on the stmmac probe error path, which a mux failure
now takes.

Tested on QEMU orangepi-pc (H3, internal PHY) with KASAN; I have no H3,
H5 or V3s board. On net-next, a test-only mdio_mux_init() failure gives
a KASAN use-after-free in clk_disable() from sun8i_dwmac_exit(), and
unbinding with the link up oopses in phy_stop(). With the series both
are clean, a test device tree whose EPHY clock has no provider
(fw_devlink=permissive) defers before the netdev exists, and three
unbind/bind cycles with the link up pass. Without patch 3, after the
failed probe and a rebind the MAC stays runtime active with usage count
1; with it the MAC runtime-suspends (usage 0).

Developed with Claude (Anthropic); I reviewed it.

[1] https://lore.kernel.org/r/20261113-b4-sun8i-emac-ephy-defer-v1-1-12a8591702fe@xxxxxxxxx

---
Changes in v4:
- Put the EPHY clock and reset after stmmac_pltfr_remove() (Chen-Yu Tsai)
- Get the EPHY clock and reset before the MAC probe, defer on the clock (Sashiko, Maxime Chevallier)
- Balance runtime PM when the stmmac probe fails (new patch 3)
- Register the mux through new stmmac mdio_init()/mdio_exit() hooks (Maxime Chevallier)
- Now a series, new cover subject
- Link to v3: https://patch.msgid.link/20261115-sun8i-emac-mux-uaf-v3-1-c69d4189539d@xxxxxxxxx

Changes in v3:
- Drop the Fixes tag (Andrew Lunn)
- Shorter commit message
- Link to v2: https://patch.msgid.link/20261113-sun8i-emac-mux-uaf-v2-1-6203666b2687@xxxxxxxxx

Changes in v2:
- Target net-next instead of net, drop Cc: stable (Andrew Lunn)
- Shorter commit message
- Rebased onto net-next
- Link to v1: https://patch.msgid.link/20261112-sun8i-emac-mux-uaf-v1-1-308ae7e6fcf2@xxxxxxxxx

---
Arun Iyengar (5):
net: stmmac: dwmac-sun8i: Put the EPHY clock and reset after the MAC
net: stmmac: dwmac-sun8i: Get the EPHY clock and reset before the MAC probe
net: stmmac: Balance runtime PM when the probe fails
net: stmmac: Add MDIO init and exit platform hooks
net: stmmac: dwmac-sun8i: Register the MDIO mux in the MDIO setup

drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 82 +++++++++--------------
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 11 +++
include/linux/stmmac.h | 2 +
4 files changed, 48 insertions(+), 49 deletions(-)
---
base-commit: 2208ab00f4f213ade91ab775e7f8c4dacdcc856e
change-id: 20261112-sun8i-emac-mux-uaf-1ba885219fee

Best regards,
--
Arun Iyengar <aiyengar1990@xxxxxxxxx>