Re: [PATCH v2 2/2] arm64: dts: renesas: r9a08g046l48-smarc: Enable CANFD
From: Geert Uytterhoeven
Date: Fri Nov 20 2026 - 06:01:01 EST
On Mon, 16 Nov 2026 at 16:33, Biju Das <biju.das.au@xxxxxxxxx> wrote:
> From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
>
> Enable CANFD channel0 and channel1 on the SMARC carrier board.
>
> Channel0 is always enabled, while channel1 is guarded by SW_DPI_EN
> since it shares pins with the DPI interface. The CAN transceiver's
> standby GPIOs are conditionally wired up based on the carrier-board
> switch settings (SW_GPIO8_CAN0_STB, SW_GPIO9_CAN1_STB).
>
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> ---
> v1->v2:
> * Reverted the order of the SW_DPI_EN and SW_SD2_EN, to match the
> signal flow order.
> * Added missing check for !SW_DPI_EN in standby-gpios.
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
i.e. will queue in renesas-devel for v7.5.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds