Re: [PATCH v4 7/7] arm64: dts: renesas: rzg3s-smarc: Enable CAN-FD

From: Geert Uytterhoeven

Date: Fri Nov 20 2026 - 06:05:39 EST


On Wed, 2 Sept 2026 at 16:16, Claudiu Beznea
<claudiu.beznea+renesas@xxxxxxxxx> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> The two CAN FD channels available on the Renesas RZ/G3S SoC are routed
> through the Renesas SMARC Carrier II board when used with the Renesas
> RZ/G3S SMARC Module.
>
> The CAN transceiver on the Carrier II board has its standby pins connected
> to GPIOs that are selected through the SW_GPIO_CAN_PMOD switches. By
> default, these switches route the GPIOs to the PMOD interfaces.
>
> Enable the CAN FD controller and its two available channels.
>
> Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> ---
>
> Changes in v4:
> - collected tags
> - used ti,tcan1046 compatible
> - adjusted the standby-gpio property along with CAN PHY node name and label
> - adjusted the CAN channels phy phandles

Thanks, will queue in renesas-devel for v7.5.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds