[PATCH v2 0/3] arm64: dts: freescale: add i.MX937 FRDM board support
From: Joy Zou
Date: Fri Nov 20 2026 - 06:05:44 EST
The i.MX937 is similar to i.MX952 in terms of hardware design, so it
reuses the i.MX952 device tree as its base to avoid duplicated dts nodes.
This series adds the DT binding compatible string for the NXP i.MX937
FRDM board and the device tree support for the board.
Compared to the i.MX952, the i.MX937 drops the local dimming and ISP
blocks and runs its Cortex-A55 cores at a lower maximum frequency. The
PCAL6416 GPIO expander is at I2C address 0x21 on i.MX937 FRDM, unlike
0x20 on i.MX952 FRDM.
Signed-off-by: Joy Zou <joy.zou@xxxxxxxxxxx>
---
Changes in v2:
- add description explaining why the i.MX952 compatible string is included
for patch #1.
- add a new patch to replace gpio-hog with gpio-mux in preparation for
i.MX937 code reuse for patch #2.
- replaced gpio-hog with gpio-mux in imx952-frdm.dtsi patch, so removed
the duplicate gpio-hog change for patch #3.
- overwrite mux-gpios property due to different expander address for patch #2.
- modify commit message for patch #3.
- Link to v1: https://patch.msgid.link/20261019-b4-imx937-frdm-v1-0-76d949a61954@xxxxxxxxxxx
---
Joy Zou (3):
dt-bindings: arm: fsl: add i.MX937 FRDM board
arm64: dts: imx952-frdm: model CAN/GPIO selector as gpio-mux
arm64: dts: freescale: add i.MX937 FRDM board support
Documentation/devicetree/bindings/arm/fsl.yaml | 7 +++
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/imx937-frdm.dts | 87 ++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx937.dtsi | 12 ++++
arch/arm64/boot/dts/freescale/imx952-frdm.dtsi | 28 ++++++---
5 files changed, 127 insertions(+), 8 deletions(-)
---
base-commit: adcad7f4e6332cff3d6d7165f41584899f598534
change-id: 20261019-b4-imx937-frdm-84ae3d4b72c1
Best regards,
--
Joy Zou <joy.zou@xxxxxxxxxxx>