[PATCH v4] dt-bindings: rtc: haoyu,hym8563: document vdd-supply
From: pjh456
Date: Fri Nov 20 2026 - 06:35:58 EST
The HYM8563 is supplied through its VDD pin. Add an optional
vdd-supply property so a board can describe the regulator connected
to it.
The property is optional because some boards connect VDD to an
always-on rail. Describing the supply also lets fw_devlink order the
RTC probe after its regulator.
Signed-off-by: pjh456 <pengjunhao409@xxxxxxxxx>
---
v4: rewrite the commit message, move the AI disclosure below --- and
drop the version links. No code changes.
v3: use the generic "vdd-supply: true" form and show the supply in the
example; reword the rationale around the hardware instead of the
fw_devlink ordering; replace the non-standard "Assisted-by:"
trailers with a disclosure paragraph in the commit message.
v2: rename vcc-supply to vdd-supply, matching the datasheet pin name.
The patch was tested on the Purple Pi OH: cold boot, same kernel Image,
only the DTB changed. With vdd-supply, 3/3 boots registered hym8563
as rtc0 at ~0.6 s. Without it, 2/2 boots failed with -110 at ~1.37 s
because the RTC probed before the i2c3 pull-up rail (vccio_acodec)
reached 3.3 V at ~1.60 s.
AI assistance: I used the HYM8563 datasheet and the board schematic as
inputs, and drafted this change with help from Qwen3.8 Flash Next and
DeepSeek V4.1 Flash through the OpenCode coding agent; Gemini 4
Hydrogen was used to cross-check the schematic in Google AI Studio.
I reviewed the result, ran dt_binding_check, and tested it on the board.
Documentation/devicetree/bindings/rtc/haoyu,hym8563.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/rtc/haoyu,hym8563.yaml b/Documentation/devicetree/bindings/rtc/haoyu,hym8563.yaml
index 0b9f39ef0edc..ce9712e2c406 100644
--- a/Documentation/devicetree/bindings/rtc/haoyu,hym8563.yaml
+++ b/Documentation/devicetree/bindings/rtc/haoyu,hym8563.yaml
@@ -29,6 +29,8 @@ properties:
wakeup-source:
description: Enables wake up of host system on alarm.
+ vdd-supply: true
+
allOf:
- $ref: rtc.yaml
@@ -52,5 +54,6 @@ examples:
reg = <0x51>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
#clock-cells = <0>;
+ vdd-supply = <&rtc_vdd>;
};
};
base-commit: 7e1392a42ea288d70a266f6553fe06f57f8647ea
--
2.56.1