[PATCH v4 0/2] drm/panel: add Novatek NT36525 (Samsung Galaxy XCover5)
From: Adil Hüsrev Tepe
Date: Fri Nov 20 2026 - 06:41:09 EST
This series adds a DRM panel driver and its DT binding for MIPI-DSI
video-mode panels based on the Novatek NT36525 controller, as fitted on
the Samsung Galaxy XCover5 (SM-G525F, Exynos850). The panel is 720x1480,
uses an active-low reset (RESX), and a DCS init sequence that mirrors
the stock Samsung bring-up. Backlight goes through drm_panel_of_backlight().
Patch 1 dt-bindings (no change since v3)
Patch 2 the panel driver
v4 addresses Uwe Kleine-König's v3 review comment: drop the unneeded
<linux/mod_devicetable.h> include (it is pulled in transitively; this
driver's of_device_id/MODULE_DEVICE_TABLE(of, ...) still build clean
without it).
Adding phone-devel@xxxxxxxxxxxxxxx to Cc per Ivon Argel's suggestion
on the v3 thread, so the relevant ecosystem developers see it (not
adding Ivon's own address; he asked not to be personally Cc'd).
On Michael McAllister's offer to add Moto G10 (DJN NT36525B) support
on top of this series: happy to see a follow-up patch once this base
driver lands; I'll reply on-list separately rather than hold this
series on it.
Tested on a Samsung Galaxy XCover5 running 7.4-rc3 plus this series
(re-confirmed 2026-11-20, kernel 7.4.0-rc3-00023-gdcb8b91fb779+ #32,
after rebasing our local tree from 7.4.0-rc1 to the real 7.4-rc3 tag):
the DSI panel connector probes and reports "connected", debugfs
reports the reset gpio as ACTIVE LOW, and /sys/class/backlight/ is
present and readable. checkpatch.pl and dt_binding_check are clean
(bar the usual new-file MAINTAINERS note; the files are covered by
the DRM PANEL DRIVERS wildcards).
Based on v7.4-rc3.
Tool usage
----------
This series was developed during XCover5 mainline bring-up with the help
of an AI coding assistant (Claude Code, Anthropic). The assistant converted
the vendor init stream to mipi_dsi_dcs_write_seq_multi(), drafted the driver
skeleton and the DT binding, and drafted these changelogs. I reviewed every
line, validated the binding (dt_binding_check, yamllint), tested the driver
on hardware, and take full responsibility for the contribution.
Prompt summary: "convert the XCover5 NT36525 vendor panel init into a
mainline drm_panel driver plus DT binding; keep it checkpatch- and
dt_binding_check-clean; test on the device." Review comments are welcome
and I will answer them myself.
Adil Hüsrev Tepe (2):
dt-bindings: display: panel: add Novatek NT36525
drm/panel: add Novatek NT36525 panel driver
.../display/panel/novatek,nt36525.yaml | 83 +++
drivers/gpu/drm/panel/Kconfig | 13 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-novatek-nt36525.c | 490 ++++++++++++++++++
4 files changed, 587 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/novatek,nt36525.yaml
create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt36525.c
--
2.53.0