Re: [PATCH v2] mtd: spi-nor: Describe locking support for MX25L51245G
From: Michael Walle
Date: Fri Nov 20 2026 - 07:41:32 EST
Hi,
sorry for the slow response.
On Wed Oct 28, 2026 at 9:15 AM CET, Cheng Ming Lin wrote:
> On 10/24/26 2:18 AM, Marek Vasut wrote:
>> Cheng Ming , can you (or someone from Macronix) please have a look at
>> this patch and confirm that it is OK ?
>
> I checked the patch against the MX25L51245G datasheet. RDCR (0x15),
> CR bit 3 as TB, the TB bit being OTP, and the 4-BP locking scheme all
> match the datasheet, so the description is correct from our side.
>
> One concern, in line with the sashiko-bot comment: since locking is
> an optional feature, I think failing to read CR should not fail the
> probe. Controllers with a restricted opcode set (e.g. spi-intel) will
> return -EOPNOTSUPP for 0x15, and this part probes fine on them today
> with macronix_qpp4b_fixups. Rather than special-casing -EOPNOTSUPP,
> how about just leaving locking disabled on any CR read error, e.g.:
>
> /*
> * Locking is optional. If CR cannot be read (e.g. the controller
> * does not support RDCR), leave locking disabled instead of
> * failing the probe.
> */
> if (mx25l51245_read_cr(nor, nor->bouncebuf))
> return 0;
>
> Michael, a related question for you. Maarten posted a series last
> year to make the RDCR opcode configurable in the core and use 0x15
> for Macronix:
>
> https://lore.kernel.org/linux-mtd/20250922155635.749975-1-maarten@xxxxxxxxxx/
>
> It stalled because setting 0x15 for all Macronix parts is wrong (e.g.
> MX25L12805D has no RDCR), and because there was no user of RDCR at the
> time. This patch is now such a user.
>
> I have gone through the flashes currently in the Macronix ID table
> and checked which ones do not have a CR / do not support RDCR. If it
> helps, I can add this information per flash entry, so that 0x15 is
> only used for the parts that actually support it. For IDs that are
> shared by several parts, RDCR would only be enabled if all of them
> support it. That should address the concern on Maarten's series, and
> this patch could then simply use spi_nor_read_cr() instead of
> implementing its own RDCR helper in macronix.c.
>
> Would that be an acceptable direction?
Yes and in fact with the recent changes, you should be able to set
.read_sr2.
-michael
Attachment:
signature.asc
Description: PGP signature