Re: [PATCH net-next] net: dsa: tag_rtl8_4: add support for RTL9607C tag variant
From: Andrew Lunn
Date: Fri Nov 20 2026 - 08:11:21 EST
On Fri, Nov 20, 2026 at 01:09:42PM +0100, Alvin Šipraga wrote:
> On Thu, Nov 19, 2026 at 09:50:51PM +0500, Rustam Adilov wrote:
> > The RTL9607C family of SoCs have an embdedded switch that utilizes
> > the same Realtek CPU Tag protocol 4 with 8 bytes in size but have
> > a bit different of a layout. And that layout is also different for
> > TX versus RX sides and introduces new fields not seen by RTL8_4.
> >
> > Add basic necessities for this cpu tag variant to function.
> >
> > Tested-by: Taiga Ogawa <zectaiga@xxxxxxxxx>
> > Signed-off-by: Rustam Adilov <adilov@xxxxxxxxxxx>
> > ---
> > Tested on OpenWrt with 6.18 kernel version [1].
>
> Mainline doesn't have the requisite DSA driver to make use of this
> protocol. Andrew, is it normal to accept tag protocol drivers without
> the corresponding DSA driver?
At minimum, i would like to know the DSA driver is on the way. It
could be posted as an RFC. Best would be to make it a patch series,
the tag driver and a minimal DSA driver. That would be normal.
Andrew