Re: [PATCH 3/3] arm64: dts: renesas: rzg3l-smarc-som: Enable SDHI2
From: Geert Uytterhoeven
Date: Fri Nov 20 2026 - 08:17:48 EST
Hi Biju,
On Thu, 12 Nov 2026 at 19:48, Biju Das <biju.das.au@xxxxxxxxx> wrote:
> From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
>
> Enable SDHI2 on the RZ/G3L SMARC EVK platform using the internal
> voltage regulator for voltage switching. SDHI2 signals are muxed
> with I2S0; the selection is controlled by the SW_SD2_EN macro in
> the board DTS, which must match the position of switch SYS.4 on
> the SoM. By default, I2S0 is enabled.
>
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> --- a/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi
> +++ b/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi
> @@ -42,6 +42,7 @@ aliases {
> ethernet1 = ð1;
> i2c0 = &i2c0;
> mmc0 = &sdhi0;
> + mmc2 = &sdhi2;
> };
>
> memory@48000000 {
> @@ -355,6 +356,74 @@ sd0-data {
> power-source = <1800>;
> };
> };
> +
> + sdhi2_pins: sd2 {
> + sd2-pwen {
> + pinmux = <RZG3L_PORT_PINMUX(K, 2, 1)>; /* SD2_PWEN */
> + };
> + };
Just wondering: why do you use the internal voltage regulator for SD2
and GPIO hogs for SD0 and SD1?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds