[PATCH v2 0/3] Add MT7629 RTC clock selection

From: Chuanhong Guo

Date: Fri Nov 20 2026 - 09:42:05 EST


The MT7629 RTC mux can select the 40 MHz crystal divided by 1024 or
1221. The integrated Wi-Fi needs the /1221 source, but the clock
driver currently exposes only the /1024 source.

First move the clock counts used by clk-mt7629.c out of the DT binding
header and into the driver. Then add clock IDs, the /1221 fixed-factor
clock and the RTC mux to allow selection of the approximately 32.76 kHz
source from device tree.

---
Changes in v2:
- Add a preparatory patch to move the TOP, INFRA, PERI and APMIXED
clock counts from the DT binding header into clk-mt7629.c.
- Update CLK_TOP_NR_CLK in the driver patch instead of the binding patch.
- Rebase onto next-20261119.
- Link to v1: https://lore.kernel.org/r/20261006-b4-mt7629-rtc-v1-0-e556386df816@xxxxxxxxx

---
Chuanhong Guo (3):
clk: mediatek: mt7629: move clock counts out of DT bindings
dt-bindings: clock: mediatek: mt7629: add RTC clock IDs
clk: mediatek: mt7629: add RTC clock selection

drivers/clk/mediatek/clk-mt7629.c | 12 ++++++++++++
include/dt-bindings/clock/mt7629-clk.h | 6 ++----
2 files changed, 14 insertions(+), 4 deletions(-)
---
base-commit: adcad7f4e6332cff3d6d7165f41584899f598534
change-id: 20260926-b4-mt7629-rtc-7488fa94b1ab

Best regards,
--
Chuanhong Guo <gch981213@xxxxxxxxx>