Re: [PATCH v2 1/2] dt-bindings: usb: cypress,cypd4226: Add orientation-gpios property
From: Heikki Krogerus
Date: Fri Nov 20 2026 - 09:51:07 EST
On Tue, Nov 17, 2026 at 07:39:47PM +0530, Akash Kumar wrote:
> Add the optional orientation-gpios property, used to sense the CC
> orientation of each Type-C connector on boards where the CCGx chip
> has no HPI register exposing CC polarity. Entries are ordered by
> connector number; an entry may be left as <0> for connectors with no
> sense line.
>
> Signed-off-by: Akash Kumar <akash.kumar@xxxxxxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml | 10 ++++++++++
> 1 file changed, 10 insertions(+)
This one did not apply on top of Greg's latest usb-next. I tried also
linux-next.
Thanks,
> diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
> index d923ef82ecfa..5716c045d87e 100644
> --- a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
> +++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
> @@ -59,6 +59,14 @@ properties:
> description: enable IRQ remote wakeup, see power/wakeup-source.txt
> type: boolean
>
> + orientation-gpios:
> + description:
> + GPIOs used to sense the CC orientation of each Type-C connector.
> + Entries are ordered by connector number, i.e. the first entry
> + corresponds to connector@0 and the second to connector@1.
> + minItems: 1
> + maxItems: 2
> +
> patternProperties:
> '^connector@[01]$':
> $ref: /schemas/connector/usb-connector.yaml#
> @@ -129,6 +137,7 @@ examples:
> };
> };
> - |
> + #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> i2c {
> #address-cells = <1>;
> @@ -141,6 +150,7 @@ examples:
> pinctrl-0 = <&usb0_intr_state>;
> pinctrl-names = "default";
> wakeup-source;
> + orientation-gpios = <0>, <&tlmm XX GPIO_ACTIVE_HIGH>;
>
> #address-cells = <1>;
> #size-cells = <0>;
>
> --
> 2.43.0
--
heikki