[PATCH mainline-linux 1/4] tty: serial: sh-sci: set the RSCI RX FIFO trigger to half the FIFO

From: Diogo Ivo

Date: Fri Nov 20 2026 - 10:50:19 EST


From: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@xxxxxxxxxxx>

The RSCI port types ask for a RX FIFO trigger equal to their FIFO size,
which rsci_scif_set_rtrg() clamps to fifosize - 1. RDRF is raised once
the FIFO holds at least RTRG bytes, so the receive interrupt arrives
with a single byte of space left, causing overruns at 1152000 baud on
RZ/T2H, and at 115200 baud on RZ/G3L.

Every other port with a FIFO triggers at half of it, SCIF at 8 of 16 and
HSCIF at 64 of 128. The only exceptions are SCIFA and SCIFB which set it
to 1 because they have no hardware FIFO timeout and a higher trigger
would leave bytes in the FIFO.

Trigger at half the FIFO for RSCI as well, 8 of 16 for RSCI_PORT_SCIF16
and 16 of 32 for the RSCI_PORT_SCIF32 types.

Cc: stable@xxxxxxxxxxxxxxx
Fixes: 3a3ab10245b6 ("serial: sh-sci: Update rx_trigger size for RZ/T2H RSCI")
Fixes: 0666e3fe95ab ("serial: sh-sci: Add support for RZ/T2H SCI")
Fixes: 42eeed6d9f31 ("serial: sh-sci: Add support for RZ/G3E RSCI")
Fixes: 8f18d3cbd920 ("serial: sh-sci: Add support for RZ/G3L RSCI")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@xxxxxxxxxxx>
Signed-off-by: Diogo Ivo <diogo.ivo.sx@xxxxxxxxxxx>
---
drivers/tty/serial/sh-sci.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index f5194cfa3364..1ab0e5677791 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -3348,9 +3348,11 @@ static int sci_init_single(struct platform_device *dev,
sci_port->rx_trigger = 64;
break;
case PORT_SCIFA:
+ sci_port->rx_trigger = 32;
+ break;
case RSCI_PORT_SCIF32:
case RSCI_PORT_SCIF32_SINGLE_TCLK:
- sci_port->rx_trigger = 32;
+ sci_port->rx_trigger = 16;
break;
case PORT_SCIF:
if (p->regtype == SCIx_SH7705_SCIF_REGTYPE)
@@ -3360,7 +3362,7 @@ static int sci_init_single(struct platform_device *dev,
sci_port->rx_trigger = 8;
break;
case RSCI_PORT_SCIF16:
- sci_port->rx_trigger = 16;
+ sci_port->rx_trigger = 8;
break;
default:
sci_port->rx_trigger = 1;

--
2.56.1