[PATCH net-next v3 4/4] net: phy: marvell: add RGMII-to-Copper mode configuration
From: Paul Louvel
Date: Fri Nov 20 2026 - 12:06:44 EST
The driver currently programs the mode only for SGMII-to-Copper, based
on the PHY interface mode.
Some MACs connect to the PHY via RGMII. Add code in
m88e1510_config_init() to configure the device.
Signed-off-by: Paul Louvel (Schneider Electric) <paul.louvel@xxxxxxxxxxx>
Reviewed-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
---
drivers/net/phy/marvell.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index a72d307eaf12..423d146426ff 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1403,9 +1403,11 @@ static int m88e1510_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- /* SGMII-to-Copper mode initialization */
+ /* RGMII/SGMII-to-Copper mode initialization */
if (phydev->interface == PHY_INTERFACE_MODE_SGMII)
err = m88e1510_config_mode(phydev, MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII);
+ else if (phy_interface_is_rgmii(phydev))
+ err = m88e1510_config_mode(phydev, MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII);
if (err < 0)
return err;
--
2.56.1