[PATCH v2 00/11] phy/drm: amlogic: Extract Meson HDMI TX PHY into a dedicated driver

From: Ronald Claveau via B4 Relay

Date: Fri Nov 20 2026 - 13:26:32 EST


This series moves the Amlogic Meson HDMI TX PHY handling (covering GXBB,
GXL, GXM, and G12A SoCs) out of the meson_dw_hdmi DRM driver and into a
dedicated generic PHY driver.

Until now, meson_dw_hdmi directly manipulated the HHI system controller
registers (HHI_HDMI_PHY_CNTL0..5) to configure analog parameters, toggle
resets, and manage power states, as well as manually ungating HDMI
clocks and power domains already described in the DT.

By extracting this logic into a standalone PHY driver under
drivers/phy/amlogic/:
- Hardware representation in the DT is cleaner, modeling the HDMI TX PHY
as a child node of the HHI syscon referenced via standard "phys"
properties.
- The DRM bridge driver relies on the standard generic PHY API
(phy_init, phy_configure, phy_power_on/off, phy_exit) rather than
touching syscon registers directly.
- Legacy DTs lacking the "phys" property remain supported via a
temporary fallback helper (meson_hdmi_phy_create_legacy) to preserve
backward compatibility to be removed on next phase of component
removal.

Overview of the series:
- Patches 1-3: Fix compatible matching in meson-gx-hhi-sysctrl bindings,
add the new amlogic,meson-hdmi-tx-phy DT schema, and allow the
"hdmi-phy" child node under the HHI syscon.
- Patch 4: Add the new Meson HDMI TX PHY driver implementing the HDMI
PHY configuration ops, along with the temporary legacy creation
helper.
- Patch 5: Document the optional "phys" and properties in the
amlogic,meson-dw-hdmi binding.
- Patch 6: Make meson-ee-pwrc power up the domain memories when the
domain is already on at probe time, as this is a prerequisite for
dropping the explicit write from meson_dw_hdmi
- Patches 7-8: Clean up manual HHI clock/power-domain writes in
meson_dw_hdmi (relying on runtime PM instead) and convert the driver
to use the generic PHY framework.
- Patches 9-11: Add the "hdmi-phy" child node and wire up the "phys"
phandle for G12, GXBB, and GXL Device Trees.

Tested on:
- Khadas VIM1 (GXL)
- dtbs_check and dt_binding_check run cleanly with no new warnings.

Signed-off-by: Ronald Claveau <linux-kernel-dev@xxxxxxxx>
---
Changes in v2:
- Patches 5,9-11: Remove unecessary "phy-names" for uniq phy.
Thanks to Neil's feedback.
- Add Patch 6: Power up the memories when the domain is already on.
From Sashiko's feedback.
- Patch 4: Add a 600MHz max_rate and a 25Mhz min_rate check and
exclude PHY_HDMI_MODE_FRL for phy_validate. Thx Sashiko.
- Patch 8: Move phy_init in dw_hdmi_phy_init and phy_exit
in dw_hdmi_phy_disable. From Sashiko review.
- Link to v1: https://patch.msgid.link/20261117-meson-drm-create-hdmitx-phy-v1-0-9e0ac931381c@xxxxxxxx

To: Rob Herring <robh@xxxxxxxxxx>
To: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
To: Conor Dooley <conor+dt@xxxxxxxxxx>
To: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
To: Kevin Hilman <khilman@xxxxxxxxxxxx>
To: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
To: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
To: Vinod Koul <vkoul@xxxxxxxxxx>
To: Manivannan Sadhasivam <mani@xxxxxxxxxx>
To: Ronald Claveau <linux-kernel-dev@xxxxxxxx>
To: David Airlie <airlied@xxxxxxxxx>
To: Simona Vetter <simona@xxxxxxxx>
To: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
To: Maxime Ripard <mripard@xxxxxxxxxx>
To: Thomas Zimmermann <tzimmermann@xxxxxxx>
To: Ulf Hansson <ulfh@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-amlogic@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-phy@xxxxxxxxxxxxxxxxxxx
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: linux-pm@xxxxxxxxxxxxxxx

---
Ronald Claveau (11):
dt-bindings: soc: amlogic: meson-gx-hhi-sysctrl: Fix compatible matching in conditionals
dt-bindings: phy: amlogic: Add Meson HDMI TX PHY binding
dt-bindings: soc: amlogic: meson-gx-hhi-sysctrl: Add hdmi-phy child node
phy: amlogic: Add Meson HDMI TX PHY driver
dt-bindings: display: amlogic,meson-dw-hdmi: Add phys
pmdomain: amlogic: meson-ee-pwrc: power up memories for boot-enabled domains
drm/meson: dw-hdmi: Drop manual HHI clock and memory PD setup
drm/meson: dw-hdmi: Use the generic PHY framework for the HDMI TX PHY
arm64: dts: amlogic: Add HDMI TX PHY node for G12
arm64: dts: amlogic: Add HDMI TX PHY node for GXBB
arm64: dts: amlogic: Add HDMI TX PHY node for GXL

.../bindings/display/amlogic,meson-dw-hdmi.yaml | 4 +
.../bindings/phy/amlogic,meson-hdmi-tx-phy.yaml | 33 +++
.../soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml | 43 ++-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 6 +
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 6 +
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 6 +
drivers/gpu/drm/meson/Kconfig | 2 +
drivers/gpu/drm/meson/meson_dw_hdmi.c | 193 +++++--------
drivers/phy/amlogic/Kconfig | 11 +
drivers/phy/amlogic/Makefile | 1 +
drivers/phy/amlogic/phy-meson-hdmi-tx.c | 319 +++++++++++++++++++++
drivers/pmdomain/amlogic/meson-ee-pwrc.c | 12 +
include/linux/phy/phy-meson-hdmi-tx.h | 19 ++
13 files changed, 520 insertions(+), 135 deletions(-)
---
base-commit: 6d582d78fad9d828e575ca0cdcff8ea47a77220b
change-id: 20261115-meson-drm-create-hdmitx-phy-4ac40a654d09

Best regards,
--
Ronald Claveau <linux-kernel-dev@xxxxxxxx>