[PATCH v3 0/3] i2c: omap: add support for DMA

From: Antoni Pokusinski

Date: Fri Nov 20 2026 - 14:00:06 EST


Hello,
This patchset introduces support for the TX & RX DMA transfers in the
am335x/omap I2C controller. I tested this implementation on AM335x
(Beaglebone Black) and things seem to work fine.

Kind regards,
Antoni Pokusinski

---
Changes since v2:
* dropped patch "i2c: omap: remove unused is_rdr and is_xdr function arguments"
* added `omap_i2c_disable/enable_pio_irqs()` helper functions
* probe: added `if (omap->dma)` before the DMA free
* xfer_data: signal DMA completion in the case of NACK interrupt
* complete_cmd: signal DMA completion in the case of bus error (e.g. AL)
* xfer_msg: removed incorrect checks `if (!omap->cmd_err)`
* xfer_msg: added handling of DMA/IRQ cleanup in the `b_hw && stop` path

Changes since v1:
* new patch "i2c: omap: remove unused is_rdr and is_xdr ..."
* probe: added `goto err_dma_free` instead of `return`
in the case of failed `i2c_add_numbered_adapter()`
* changes in XRDY/RRDY, XDR/RDR interrupts management:
- init: do not enable the above-mentioned intrerupts
- xfer_msg: enable the interrupts before any non-DMA transfer
- xfer_msg: disable the interrupts after any non-DMA transfer
* xfer_msg: added checks on `omap->cmd_err` to catch
NACK or AL error occured during DMA transfers
* general: moved scheme-related macros to the top of the file

Antoni Pokusinski (3):
dt-bindings: i2c: ti,omap4-i2c: Add DMA properties
ARM: dts: am33xx-l4: Add missing DMAs for I2C controllers
i2c: omap: add DMA support

.../devicetree/bindings/i2c/ti,omap4-i2c.yaml | 12 +
arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi | 4 +
drivers/i2c/busses/i2c-omap.c | 373 +++++++++++++++++-
3 files changed, 368 insertions(+), 21 deletions(-)

--
2.56.1