[PATCH 6/6] ARM: dts: zte: Declare the HSIC controller node
From: Stefan Dösinger
Date: Fri Nov 20 2026 - 14:21:47 EST
This is for documentation purposes. I have not seen any board yet that
actually connects anything to it. On newer boards it seems to be removed
entirely.
Signed-off-by: Stefan Dösinger <stefandoesinger@xxxxxxxxx>
---
arch/arm/boot/dts/zte/zx297520v3.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/zte/zx297520v3.dtsi b/arch/arm/boot/dts/zte/zx297520v3.dtsi
index 2fc888b10006..56d6b46a8ed1 100644
--- a/arch/arm/boot/dts/zte/zx297520v3.dtsi
+++ b/arch/arm/boot/dts/zte/zx297520v3.dtsi
@@ -199,5 +199,24 @@ usb@1500000 {
phys = <&topcrm ZX297520V3_USB_PHY>;
phy-names = "usb2-phy";
};
+
+ /* The HSIC controller exists primarily on older hardware, but I haven't seen any
+ * device that is actually connected to it on any board.
+ */
+ usb@1600000 {
+ compatible = "snps,dwc2";
+ reg = <0x01600000 0x40000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topcrm ZX297520V3_HSIC_WCLK>, <&topcrm ZX297520V3_HSIC_PCLK>;
+ clock-names = "otg", "utmi";
+ dr_mode = "host";
+ resets = <&topcrm ZX297520V3_HSIC_RESET>;
+ reset-names = "dwc2";
+ power-domains = <&socsys ZX297520V3_PD_USB>;
+ phys = <&topcrm ZX297520V3_HSIC_PHY>;
+ phy-names = "usb2-phy";
+
+ status = "disabled";
+ };
};
};
--
2.56.1