[PATCH v11 23/26] dt-bindings: mtd: sunxi: require the H616 AHB reset
From: James Hilliard
Date: Fri Nov 20 2026 - 20:13:56 EST
Normal NAND reads and writes worked on H616. Fault injection exposed a
failure when recovering from an aborted internal DMA transfer: the
controller's soft reset could leave the first subsequent read displaced,
sometimes without an ECC error. This was not observed during ordinary
I/O.
The controller needs its AHB reset to stop internal DMA and restore data
ordering after an aborted transfer. Require resets and reset-names for
the H616 compatible so the binding describes the reset needed for
recovery. The in-tree H616 SoC description already supplies the named
reset. Older descriptions that omit it were valid under the previous
binding and do not describe the reset needed after a DMA abort.
Signed-off-by: James Hilliard <james.hilliard1@xxxxxxxxx>
---
Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
index 9d061e2216cb..ccf616fabc91 100644
--- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
@@ -119,6 +119,9 @@ allOf:
minItems: 4
clock-names:
minItems: 4
+ required:
+ - resets
+ - reset-names
examples:
- |
--
2.53.0