Re: [PATCH 1/2] dt-bindings: iio: adc: adi,ad7124: make interrupts optional

From: Jonathan Cameron

Date: Fri Nov 20 2026 - 21:08:22 EST


On Fri, 20 Nov 2026 12:26:47 +0100
ILYAS NHASSE via B4 Relay <devnull+ilyas.nhasse.skf.com@xxxxxxxxxx> wrote:

> From: ILYAS NHASSE <ilyas.nhasse@xxxxxxx>
>
> The AD7124 signals the end of a conversion on its DOUT/RDY pin, which is
> also the SPI MISO line. Using it as an interrupt requires the board to
> route that pin to an interrupt-capable input as well, which is not always
> possible, e.g. when the ADC sits behind a digital isolator that only
> carries the SPI signals.

All that matters in this is

DOUT/RDY may not wired. The next bit is useful for why we can support
that case.

>
> The end of a conversion can also be read from the RDY bit of the status
> register, so the interrupt is not needed to operate the device. Drop it
> from the required properties.
>
> Signed-off-by: ILYAS NHASSE <ilyas.nhasse@xxxxxxx>
> ---
> Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> index 2e3f84db6..875f46477 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> @@ -76,7 +76,6 @@ properties:
> required:
> - compatible
> - reg
> - - interrupts
>
> # Can't have both clock input and output at the same time.
> not:
>