[PATCH v3 0/2] media: verisilicon: Fix VDPU2 decoder error handling

From: Arun Iyengar via B4 Relay

Date: Sat Nov 21 2026 - 01:30:30 EST


The VDPU2 decoder reports failed decodes as done, and its interrupt
handler can finish a job the decoder is still working on.

Tested on Orange Pi 5 (RK3588S), v7.3-based KASAN kernel. v2: 72 H.264
fluster suite runs, 50 error-stream runs; no IOMMU faults or timeouts.
v3: one suite run and VP8 61/61, same results. The decoder was still
enabled after both buffer-empty interrupts of that run; a later
interrupt ended the job.
With a TEST-only patch (not in this series), the IRQ_NONE path ran
200 times on real registers; bus error and timeout, simulated 5 times
each by injected status bits, were logged and ended their jobs at once.
VP8 stayed 61/61 bit-exact.
A TEST-only injection of a decoder stopping right after the status clear:
with this order each re-raised interrupt ended its own job (bit-exact);
with the v2 order it ended the next job early.
Build-tested on media next. MPEG-2, RK3399 and RK3568 untested.

Developed with Claude (Anthropic), which wrote the code and the commit
messages. I reviewed every change.

Signed-off-by: Arun Iyengar <aiyengar1990@xxxxxxxxx>
---
Changes in v3:
- Patch 2: read DEC_E before clearing the status, as G2 does (Sashiko)
- Link to v2: https://patch.msgid.link/20261120-vdpu2-errreset-v2-0-8f4ef55e6dee@xxxxxxxxx

Changes in v2:
- Patch 2: no reset after an error; handle the interrupt like the G2
handler instead (Nicolas)
- Link to v1: https://patch.msgid.link/20261119-vdpu2-errreset-v1-0-f8fa403b6a3a@xxxxxxxxx

---
Arun Iyengar (2):
media: verisilicon: Don't report VDPU2 decoder errors as success
media: verisilicon: Handle VDPU2 decoder interrupts like the G2

.../media/platform/verisilicon/rockchip_vpu_hw.c | 24 +++++++++++++++++++---
1 file changed, 21 insertions(+), 3 deletions(-)
---
base-commit: aa0f4c41d4870a18e65772a1817af16427200371
change-id: 20261115-vdpu2-errreset-8688700393a3

Best regards,
--
Arun Iyengar <aiyengar1990@xxxxxxxxx>