Re: [PATCH v5 02/10] arm64: dts: qcom: add LG V60 ThinQ 5G (timelm) support

From: Krzysztof Kozlowski

Date: Sat Nov 21 2026 - 05:24:25 EST


On Fri, Nov 20, 2026 at 04:54:41PM +0100, Abdur Rofik wrote:
> Add initial device tree and MAINTAINERS entry for the LG V60 ThinQ 5G
> (timelm), an SM8250-based smartphone released in 2020.
>
> The initial description enables:
> - Memory reservations for bootloader and firmware log regions
> - Simple framebuffer continuous splash reservation
> - Volume Down and Assistant keys via PM8150 GPIOs
> - Volume Up key via PM8150 RESIN
> - RPMh power supplies across PM8150, PM8150L, and PM8009
> - Storage via UFS 3.0 and SD card via SDHC2 with pinctrl states
> - Graphics via Adreno 650 GPU with GMU and ZAP shader firmware
> - High-Speed USB and SuperSpeed QMP PHY
> - Console output on GENI UART12
>
> Signed-off-by: Abdur Rofik <rofikcoga@xxxxxxxxx>
> ---
> MAINTAINERS | 6 +
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts | 592 ++++++++++++++++++

You need to slow down. 10 patches patchset sent twice that day and
before every day.

> 3 files changed, 599 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ccbcdc0799b9f..80c1bfb66f8cc 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15211,6 +15211,12 @@ F: Documentation/ABI/testing/sysfs-platform-lg-laptop
> F: Documentation/admin-guide/laptops/lg-laptop.rst
> F: drivers/platform/x86/lg-laptop.c
>
> +LG V60 THINQ 5G (TIMELM) SUPPORT
> +M: Abdur Rofik <rofikcoga@xxxxxxxxx>
> +L: linux-arm-msm@xxxxxxxxxxxxxxx
> +S: Maintained
> +F: arch/arm64/boot/dts/qcom/sm8250-lg-timelm*

That's the first time one adds entry for individual boards for Qualcomm.
That is fine for me, but in this case - three days ago you never heard
about DCO and did not even read the docs before submitting patches, so
honestly - too early.

Best regards,
Krzysztof